Author |
Message |
 |
|
 |
Advert
|
Forum adverts like this one are shown to any user who is not logged in. Join us by filling out a tiny 3 field form and you will get your own, free, dakka user account which gives a good range of benefits to you:
- No adverts like this in the forums anymore.
- Times and dates in your local timezone.
- Full tracking of what you have read so you can skip to your first unread post, easily see what has changed since you last logged in, and easily see what is new at a glance.
- Email notifications for threads you want to watch closely.
- Being a part of the oldest wargaming community on the net.
If you are already a member then feel free to login now. |
|
 |
![[Post New]](/s/i/i.gif) 2009/11/20 18:00:09
Subject: Re:NEW P.A.C.K. MAX (Finally something for large models like the Thunderhawk and Reaver Titan)
|
 |
Ultramarine Terminator with Assault Cannon
|
Sgt Diablo wrote:The trays just could not be made to fit perfect because the bag is so large. We would have to redesign the entire line of bags just to have them fit super snug. As you can see from the video, the trays have really no place to go.
Hope that helps.
Romeo
Battle Foam
No you don't. Just make a foam lining that fills the space.
Like this...
...and you can take that to the bank, Romeo.
|
|
 |
 |
![[Post New]](/s/i/i.gif) 2009/11/20 18:09:16
Subject: Re:NEW P.A.C.K. MAX (Finally something for large models like the Thunderhawk and Reaver Titan)
|
 |
Stabbin' Skarboy
|
Oni - I can see what you mean and we looked at that when we designed the bag and foam. The problem is that we would be waisting hundreds of dollars in foam to make a 2 or 3 inch boarder around the center trays. As much as that's a good idea the bag would be so expensive it would not make any sense to buy.
So I guess we took that to the bank, and it cost to much.
Romeo
Battle Foam
|
Custom Cut Foam Trays and Carrying Cases. WWW.BATTLEFOAM.COM Serving the world from our two locations in the US and UK. |
|
 |
 |
![[Post New]](/s/i/i.gif) 2009/11/20 19:00:42
Subject: NEW P.A.C.K. MAX (Finally something for large models like the Thunderhawk and Reaver Titan)
|
 |
Longtime Dakkanaut
|
yeah,
I like the idea of a foam liner, but with cut out areas for extra models and dice ect..
When you buy the bag do you pay for it to be full of foam cut anyway you want? Or is say the 'Thunderhawk load out' only half a case of foam and cheaper?
Panic...
|
This message was edited 1 time. Last update was at 2009/11/20 19:01:13
|
|
 |
 |
![[Post New]](/s/i/i.gif) 2009/11/20 19:12:55
Subject: Re:NEW P.A.C.K. MAX (Finally something for large models like the Thunderhawk and Reaver Titan)
|
 |
Stabbin' Skarboy
|
Hi Panic,
You can order it in a few ways. You can go with a full custom job that lets you have anything you want in the case or you can pick from the different pre cut loadouts. Those are cheaper then the custom and you can go with a full set of foam or partial.
Hope that helps, but check out the video for a better idea.
Romeo
Battle Foam
|
Custom Cut Foam Trays and Carrying Cases. WWW.BATTLEFOAM.COM Serving the world from our two locations in the US and UK. |
|
 |
 |
![[Post New]](/s/i/i.gif) 2009/11/20 19:16:41
Subject: NEW P.A.C.K. MAX (Finally something for large models like the Thunderhawk and Reaver Titan)
|
 |
Awesome Autarch
|
That looks great. I have a collection of super heavies now and have already had one minor break in one of my models due to my woefully inadequate home made cardboard transportation system.
|
|
|
 |
 |
![[Post New]](/s/i/i.gif) 2009/11/20 19:20:04
Subject: NEW P.A.C.K. MAX (Finally something for large models like the Thunderhawk and Reaver Titan)
|
 |
Longtime Dakkanaut
|
yeah,
I will be checking it out when I get around to building my little WarHound...
Panic...
|
|
|
 |
 |
![[Post New]](/s/i/i.gif) 2009/11/20 19:23:52
Subject: Re:NEW P.A.C.K. MAX (Finally something for large models like the Thunderhawk and Reaver Titan)
|
 |
Deadly Dire Avenger
|
Sgt Diablo wrote:Hi Panic,
You can order it in a few ways. You can go with a full custom job that lets you have anything you want in the case or you can pick from the different pre cut loadouts. Those are cheaper then the custom and you can go with a full set of foam or partial.
Hope that helps, but check out the video for a better idea.
Romeo
Battle Foam
So can I order a fully custom job, and out of the 12 inches of foam have the bottom 6 inches for my titans, falcons etc, and then with the second 6 inches have it as 5 1 inch sections that are made for infantry to suit the exact shapes of my eldar infantry. I would do the plan etc. You would just need to cut it out lol.
If this can be done my entire Eldar army and two revenants will fit in one big case and I will make the plan and order asap.
|
|
 |
 |
![[Post New]](/s/i/i.gif) 2009/11/20 19:27:50
Subject: Re:NEW P.A.C.K. MAX (Finally something for large models like the Thunderhawk and Reaver Titan)
|
 |
Stabbin' Skarboy
|
Vegeta - Yes you can totally do that but keep in mind that those trays will be huge. We will cut them in half so that you can pull them out without having issues.
Looking forward to your order.
Romeo
Battle Foam
|
Custom Cut Foam Trays and Carrying Cases. WWW.BATTLEFOAM.COM Serving the world from our two locations in the US and UK. |
|
 |
 |
![[Post New]](/s/i/i.gif) 2009/11/24 04:24:02
Subject: NEW P.A.C.K. MAX (Finally something for large models like the Thunderhawk and Reaver Titan)
|
 |
Tinkering Tech-Priest
|
i am just wondering if you will have one for a imperial navy wing.
cause i have 1 thunderbolt and just ordered 2 more and a marauder bomber, and i will need something to transport them in
|
armored company 18/2/3
3/1/8
5/1/12
3/0/5
3/0/2 |
|
 |
 |
![[Post New]](/s/i/i.gif) 2009/11/24 16:18:51
Subject: NEW P.A.C.K. MAX (Finally something for large models like the Thunderhawk and Reaver Titan)
|
 |
Bounding Dark Angels Assault Marine
South East USA
|
Do you have any special requirements for the Thunderhawks when building them, like with the Reaver in sections ( top , legs , weapons, missiles)
Getting ready to start building one.
|
|
|
 |
 |
![[Post New]](/s/i/i.gif) 2009/11/24 17:05:08
Subject: Re:NEW P.A.C.K. MAX (Finally something for large models like the Thunderhawk and Reaver Titan)
|
 |
Stabbin' Skarboy
|
Hi TobyDog,
No special requirements needed my friend. The Thunderhawk is a straight forward model so as long as you don't add anything to the overall shape or size of it we should be fine with your pre cut.
Romeo
Battle Foam
|
Custom Cut Foam Trays and Carrying Cases. WWW.BATTLEFOAM.COM Serving the world from our two locations in the US and UK. |
|
 |
 |
|