Switch Theme:

Mecha Front - News & Releases  [RSS] Share on facebook Share on Twitter Submit to Reddit
»
Author Message
Advert


Forum adverts like this one are shown to any user who is not logged in. Join us by filling out a tiny 3 field form and you will get your own, free, dakka user account which gives a good range of benefits to you:
  • No adverts like this in the forums anymore.
  • Times and dates in your local timezone.
  • Full tracking of what you have read so you can skip to your first unread post, easily see what has changed since you last logged in, and easily see what is new at a glance.
  • Email notifications for threads you want to watch closely.
  • Being a part of the oldest wargaming community on the net.
If you are already a member then feel free to login now.




Made in us
Longtime Dakkanaut





IL

Despite working in 3d and opperating a webstore I'm about an non-techy as it gets. If I could figure out how to host elsewhere I would, I don't know how else to publically host files.

There's a couple very basic in prgress renders in the facebook album (www.facebook.com/paulsongames) I didn't want to tie up the thread with lots of progress shots, I'm trying to stick to the finished conceps and colored artwork artwork. As soon as I have some final renders done I'll post them here. Same with the physical models when they are back from printing.


And quoting the Monday preview so people don't miss it due to the page roll over.




This message was edited 1 time. Last update was at 2013/04/30 08:32:06


Paulson Games parts are now at:
www.RedDogMinis.com 
   
Made in gb
Ichor-Dripping Talos Monstrosity






Mediafire is a pretty good option for temporary public hosting, without the need to log in.

HOWEVER, there is a Files section you can use on your Facebook Page, which may be best for you.

   
Made in us
[DCM]
Dankhold Troggoth






Shadeglass Maze

OT wrote:
Can you put the rules up anywhere else? Yahoo is just...awful. I've been trying to log on to their stupid groups thingie for half an hour now, to no avail.

Paulson, you must be doing something right. The above user only has 10 posts... since '05! That's less than 2 a year. And one is asking about your rules

Also shows how much yahoo sucks, though. Maybe Google groups / Google docs? People might have to sign up for a list, but that's reasonable. I've had trouble with the yahoo group, too...
   
Made in my
Fresh-Faced New User




 RiTides wrote:
OT wrote:
Can you put the rules up anywhere else? Yahoo is just...awful. I've been trying to log on to their stupid groups thingie for half an hour now, to no avail.

Paulson, you must be doing something right. The above user only has 10 posts... since '05! That's less than 2 a year. And one is asking about your rules

Also shows how much yahoo sucks, though. Maybe Google groups / Google docs? People might have to sign up for a list, but that's reasonable. I've had trouble with the yahoo group, too...


That's cuz I lurk like a champ, newbie!

But yes, this game has got me fiendishly excited.

This message was edited 1 time. Last update was at 2013/04/30 12:26:12


 
   
Made in us
[DCM]
Dankhold Troggoth






Shadeglass Maze

Hahaha that's fantastic . But now you're maxed out for this year already! Might be time to change your lurking ways

This message was edited 1 time. Last update was at 2013/04/30 13:32:12


 
   
Made in us
Posts with Authority





South Carolina (upstate) USA

 paulson games wrote:
Fret not my Gear Heads; Mecha Front Monday has not yet passed. (its just running late as I've been slammed with work all day)




So how's that for your Monday preview?





.


Looking good. What size class...medium?

Whats my game?
Warmachine (Cygnar)
10/15mm mecha
Song of Blades & Heroes
Blackwater Gulch
X wing
Open to other games too






 
   
Made in us
Fixture of Dakka






Akron, OH

You could put them on WargameVault, either for free or for sale.

-Emily Whitehouse| On The Lamb Games
 
   
Made in us
Sniping Reverend Moira





Cincinnati, Ohio

Anyone know if the Adepticon code for the Paulson bitz is still active, and if so do you have it? I'm looking through all my stuff from Adepticon and can't find the slip, though I did find my paulson underslung rocket pack bit.

Cheers if anyone can help a brotha out.

 
   
Made in us
Longtime Dakkanaut





IL

Today is the last day it's valid, so get that order in now.


The mech in the art is the Neo Bloc medium.

This message was edited 1 time. Last update was at 2013/04/30 19:03:01


Paulson Games parts are now at:
www.RedDogMinis.com 
   
Made in us
Longtime Dakkanaut





IL

Incoming!

Neo-Bloc Heavy


Paulson Games parts are now at:
www.RedDogMinis.com 
   
Made in us
Terminator with Assault Cannon





Florida

Looking good!

SickSix's Silver Skull WIP thread
My Youtube Channel
JSF wrote:... this is really quite an audacious move by GW, throwing out any pretext that this is a game and that its customers exist to do anything other than buy their overpriced products for the sake of it. The naked arrogance, greed and contempt for their audience is shocking.
= Epic First Post.
 
   
Made in us
[DCM]
Dankhold Troggoth






Shadeglass Maze

Sweet although Neo-Bloc isn't the one I'm interested in
   
Made in ca
Fixture of Dakka





Bathing in elitist French expats fumes

I love the pepper-box look of the arm guns.

Will we be playing with ammo allocation, Mr. Paulson?

Yes, it's a shame I haven't gone through all the rules yet, but I've been busy with work, and work, and school.

 GamesWorkshop wrote:
And I would have gotten away with it too, if it weren't for you meddling kids!

 
   
Made in us
Longtime Dakkanaut





IL

There's no ammo tracking for standard weapons. Missiles have a limited number of shots as they are significantly more powerful, but standard stuff is considered to be unlimited during a standard engagement.

Paulson Games parts are now at:
www.RedDogMinis.com 
   
Made in us
Twisted Trueborn with Blaster





North Denver

Very excited to playtest this over the next week and report back! This is the first mech game I'm legitimately excited for!
   
Made in my
Fresh-Faced New User




Arrrrg, I don't know which faction I like more!

How feasible is an army/warband consisting solely of light mechs?
   
Made in ca
Fixture of Dakka





Bathing in elitist French expats fumes

Well light mechs tend to give sensor dice, so they could offset the heavier mechs by the sheer amount of dice you can throw.

 GamesWorkshop wrote:
And I would have gotten away with it too, if it weren't for you meddling kids!

 
   
Made in us
[DCM]
.







I'm in a bit of trouble when this releases because... I like all the factions previewed so far!
   
Made in us
Longtime Dakkanaut





IL

A light mech force would be feasible, although it'd be tricky. You'd probably want 1-2 mediums as they would help bring missiles or a railgun which are crucial against heavier targets.

Most of the light mechs are at a partial disadvantage against heavy and quads as their weapons tend to have less of a punch which makes penetrating armor more difficult. Also because they rely primarily on having a high defense to avoid being hit they can be more vunerabel to missile attacks (as missile auto hit) Many light mechs carry machine guns and light autocannons which can help defend against missiles a bit, but a solid hit from a heavy or quad using lasers or railguns can one shot a light mech as they peel through armor like butter and light mechs are lacking in the armor department.

The one advantage that light mechs have is that most of them have one or more sensor dice which they can combine to take down other mechs ala wolf pack style. If they focus as a team on a single target they can overpower heavier stuff, particuarly if they are supporting a medium mech who does the primary shooting. I think it'd take some work and focusing on the mobility of the force to take proper advantage of cover but it should be possible.

That said I haven't tested exclusively light mech lists as part of the playtesting just yet but with some finesse I think you could pull it off.

The typical force I've been testing with is

2 lights, 2 mediums, 1 heavy (average force size totaling 6 mechs)


While I don't have a finalized points sytem in place just yet the aproximation would be: 2 lights would be comperable to 1 medium, 3 lights to a heavy, or 4 lights to a quad.

So a completely light list would likely be 9 light mechs (which is a lot of mechs for this system) Or maybe 5 lights in support of 2 mediums, which would be a more optimal build IMO.




.

This message was edited 1 time. Last update was at 2013/05/07 20:30:08


Paulson Games parts are now at:
www.RedDogMinis.com 
   
Made in us
Posts with Authority





South Carolina (upstate) USA

 Alpharius wrote:
I'm in a bit of trouble when this releases because... I like all the factions previewed so far!



As do I, though Im leaning heavily towards NorAm as a favorite. When the kickstarter goes up Id like to get a set of both, but if I have to choose it will likely be NorAm.

Whats my game?
Warmachine (Cygnar)
10/15mm mecha
Song of Blades & Heroes
Blackwater Gulch
X wing
Open to other games too






 
   
Made in us
Longtime Dakkanaut





IL

Just to keep you from getting too comfy with your early choices... next monday I should have colored art for the blackfrost heavy.

If I do my job right you'lll want them all



Its hard to remain impartial, I personally prefer the NoArm look slightly more but I think so far all 3 factions have distinct visuals I like about each one. If I were strictly a player (removed form the designing, withotu any sales push) I know I'd have two factions that way I would have enough I could get a friend to play and it wouldn't break the bank compared to other games. Further down the road when there's like 6-7 factions to chose from then I think choosing a favorite would become a bit tougher.

Paulson Games parts are now at:
www.RedDogMinis.com 
   
Made in us
Most Glorious Grey Seer





Everett, WA

As you get closer to the launch of your kickstarter, please do some feasibility studies as to how much you'd need to take in so that you can make these things as multi-part plastic kits instead of resin. While I understand your position, I think that having the possibility of these in plastic will provide a very strong incentive to fund your project.

 
   
Made in us
[DCM]
Dankhold Troggoth






Shadeglass Maze

 paulson games wrote:
Just to keep you from getting too comfy with your early choices... next monday I should have colored art for the blackfrost heavy.

Nice . Blackfrost are indeed sweet, even not colored in!

I'm hoping these illustrations will be in the rulebook, or maybe even an artbook? Either one would get you some backers dipping their toes in who weren't yet ready / didn't have the funds to spring for the models, but might be tempted to get the models later
   
Made in us
Longtime Dakkanaut





IL

We were looking at some artic camo for the blackfrost mechs, saw this one and had to share. Sadly it's a bit complex to replicate across the mechs but talk about stylin'




Paulson Games parts are now at:
www.RedDogMinis.com 
   
Made in gb
Ichor-Dripping Talos Monstrosity






With a set of 3 Laser Cut stencils you could probably pull it off.... xD

   
Made in us
The Hive Mind





http://www.camodipkit.com/

All I need now is the minis.

My beautiful wife wrote:Trucks = Carnifex snack, Tanks = meals.
 
   
Made in us
Posts with Authority





South Carolina (upstate) USA

rigeld2 wrote:
http://www.camodipkit.com/

All I need now is the minis.


I used to work at Barnett Crossbows and that is how they did the camo on their bows. The dip room employees would use the scraps of camo for stuff like cell phone covers & other small things.

Whats my game?
Warmachine (Cygnar)
10/15mm mecha
Song of Blades & Heroes
Blackwater Gulch
X wing
Open to other games too






 
   
Made in us
The Hive Mind





I will have a quad dipped like that. I guarantee it.
It will be epic.

My beautiful wife wrote:Trucks = Carnifex snack, Tanks = meals.
 
   
Made in us
Inexperienced VF-1A Valkyrie Brownie





 paulson games wrote:


Its hard to remain impartial, I personally prefer the NoArm look slightly more


I hear they have a support group for those who like those armless department store mannequins.....

I like the blackfrost so far, but really hoping you stick with fewer factions and put out a second light, med, heavy etc before opening up more factions.

Also, what's the likelihood of mixed units, ala merc style, with mecha from different factions?
   
Made in us
Blood Angel Captain Wracked with Visions






 paulson games wrote:
We were looking at some artic camo for the blackfrost mechs, saw this one and had to share. Sadly it's a bit complex to replicate across the mechs but talk about stylin'




Needs a Limited Edition mech pilot miniature with hat, fur coat and cane

 
   
 
Forum Index » News & Rumors
Go to: