Switch Theme:

Necromunda Underhive - House of Chains Pg272  [RSS] Share on facebook Share on Twitter Submit to Reddit
»
Author Message
Advert


Forum adverts like this one are shown to any user who is not logged in. Join us by filling out a tiny 3 field form and you will get your own, free, dakka user account which gives a good range of benefits to you:
  • No adverts like this in the forums anymore.
  • Times and dates in your local timezone.
  • Full tracking of what you have read so you can skip to your first unread post, easily see what has changed since you last logged in, and easily see what is new at a glance.
  • Email notifications for threads you want to watch closely.
  • Being a part of the oldest wargaming community on the net.
If you are already a member then feel free to login now.




Made in gb
Decrepit Dakkanaut







JimmyWolf87 wrote:
This update both helps clarify and makes it just as vague at the same time. It's quite a feat.


Welcome to Necromunda 2017

2021-4 Plog - Here we go again... - my fifth attempt at a Dakka PLOG

My Pile of Potential - updates ongoing...

Gamgee on Tau Players wrote:we all kill cats and sell our own families to the devil and eat live puppies.


 Kanluwen wrote:
This is, emphatically, why I will continue suggesting nuking Guard and starting over again. It's a legacy army that needs to be rebooted with a new focal point.

Confirmation of why no-one should listen to Kanluwen when it comes to the IG - he doesn't want the IG, he want's Kan's New Model Army...

tneva82 wrote:
You aren't even trying ty pretend for honest arqument. Open bad faith trolling.
- No reason to keep this here, unless people want to use it for something... 
   
Made in si
Foxy Wildborne







Well, I ordered me a set #2. Hoping for Goliaths and Orlocks soon with some more exciting weapon selections.

The old meta is dead and the new meta struggles to be born. Now is the time of munchkins. 
   
Made in gb
Dakka Veteran





Looking at the sets again they don’t seem too disappointing. There’s 1 heavy and 3 special per set and then a variety of other weapons. It’s not perfect but better then I first thought.
   
Made in us
Most Glorious Grey Seer





Everett, WA

So much for my hope of getting a right hand stub pistol for my Goliaths.


 
   
Made in au
Owns Whole Set of Skullz Techpriests






Versteckt in den Schatten deines Geistes.

 Breotan wrote:
So much for my hope of getting a right hand stub pistol for my Goliaths.
You didn't think the Escher set would contain weapons for the Goliaths, did you?

Industrial Insanity - My Terrain Blog
"GW really needs to understand 'Less is more' when it comes to AoS." - Wha-Mu-077

 
   
Made in vn
Longtime Dakkanaut




warl0rdb0b wrote:

There's a good number from the multipart Genestealer Cult units, 5 in the Acolyte set alone.


The arm have 3rd gen Genestealer Hybrid skeletal hand, with claw.

Same for some of the arms from Neophyte Hybrid box, including the Heavy Stubber arm.

People are fine with this?

This message was edited 3 times. Last update was at 2018/03/17 00:37:01


 
   
Made in nl
Stone Bonkers Fabricator General




We'll find out soon enough eh.

Chopstick wrote:
warl0rdb0b wrote:

There's a good number from the multipart Genestealer Cult units, 5 in the Acolyte set alone.


The arm have 3rd gen Genestealer Hybrid skeletal hand, with claw.

Same for some of the arms from Neophyte Hybrid box, including the Heavy Stubber arm.

People are fine with this?



So, err, cut the hand off and stick the gun on a ganger's hand. In the case of the Heavy Stubber, I used that myself for a Goliath, you just need to trim the "claws" a little on the left hand and scrape down the back of the right hand a little bit.

I need to acquire plastic Skavenslaves, can you help?
I have a blog now, evidently. Featuring the Alternative Mordheim Model Megalist.

"Your society's broken, so who should we blame? Should we blame the rich, powerful people who caused it? No, lets blame the people with no power and no money and those immigrants who don't even have the vote. Yea, it must be their fething fault." - Iain M Banks
-----
"The language of modern British politics is meant to sound benign. But words do not mean what they seem to mean. 'Reform' actually means 'cut' or 'end'. 'Flexibility' really means 'exploit'. 'Prudence' really means 'don't invest'. And 'efficient'? That means whatever you want it to mean, usually 'cut'. All really mean 'keep wages low for the masses, taxes low for the rich, profits high for the corporations, and accept the decline in public services and amenities this will cause'." - Robin McAlpine from Common Weal 
   
Made in vn
Longtime Dakkanaut




It'll probably look bad and you'll end up chopping more 4th Gen GSC arm just to have a matching grip. For Goliath it was pretty simple if you want a Hand Flamer, just use the Space Marine one.

I mean if you don't really care you can just slap them togerther and move on, but for me everytime I tried a separate grip arm + gun I end up have to re-adjust the gun constantly because I feel like they're always slightly misaligned.

This message was edited 1 time. Last update was at 2018/03/17 01:20:11


 
   
Made in us
Dakka Veteran




Portland

I'm pretty pleased with these weapon sets, except for the lack of shotguns. Thats a real missed opportunity and kind of a head scratcher.

I do like that there are lots of mirror options for stuff we already have. It may seem redundant, but as someone who is really excited for Necormonuda for the model building opportunities and opens up a bunch of neat options. I'll probably end up building 40 or more Eschers just for fun and painting, even if I never actually use more than a 10 or so.
   
Made in si
Foxy Wildborne







 jake wrote:
I'm pretty pleased with these weapon sets, except for the lack of shotguns. Thats a real missed opportunity and kind of a head scratcher.


Especially when they bothered to put a new ammo type for shotguns in the pdf.

The old meta is dead and the new meta struggles to be born. Now is the time of munchkins. 
   
Made in nl
Stone Bonkers Fabricator General




We'll find out soon enough eh.

Chopstick wrote:
It'll probably look bad and you'll end up chopping more 4th Gen GSC arm just to have a matching grip. For Goliath it was pretty simple if you want a Hand Flamer, just use the Space Marine one.

I mean if you don't really care you can just slap them togerther and move on, but for me everytime I tried a separate grip arm + gun I end up have to re-adjust the gun constantly because I feel like they're always slightly misaligned.


I mean, sure, things will look bad if you put no effort into them. And? The FW weapon arms will look bad if you just took them out of the baggie and slapped them on the models with zero effort, they need to be washed and prepped, pinned and gap-filled to look their best - why is fixing a marginal misalignment at the shoulder joint easier than fixing a marginal misalignment between the hand and the gun?

And hey, maybe I'm just delusional, but I don't think this looks gak:



...mold line on the foot I hadn't noticed before aside. Took about half an hour of test fitting arms, trimming the GSC stubber, and gap filling.

I need to acquire plastic Skavenslaves, can you help?
I have a blog now, evidently. Featuring the Alternative Mordheim Model Megalist.

"Your society's broken, so who should we blame? Should we blame the rich, powerful people who caused it? No, lets blame the people with no power and no money and those immigrants who don't even have the vote. Yea, it must be their fething fault." - Iain M Banks
-----
"The language of modern British politics is meant to sound benign. But words do not mean what they seem to mean. 'Reform' actually means 'cut' or 'end'. 'Flexibility' really means 'exploit'. 'Prudence' really means 'don't invest'. And 'efficient'? That means whatever you want it to mean, usually 'cut'. All really mean 'keep wages low for the masses, taxes low for the rich, profits high for the corporations, and accept the decline in public services and amenities this will cause'." - Robin McAlpine from Common Weal 
   
Made in gb
Regular Dakkanaut




Chopstick wrote:
warl0rdb0b wrote:

There's a good number from the multipart Genestealer Cult units, 5 in the Acolyte set alone.


The arm have 3rd gen Genestealer Hybrid skeletal hand, with claw.

Same for some of the arms from Neophyte Hybrid box, including the Heavy Stubber arm.

People are fine with this?



You could snip/cut the gun away from the hand and do the same with the Escher hands, its not the most taxing of conversions.
   
Made in gb
Lord of the Fleet






Baxx wrote:
Wasn't hand flamer quite hard to get? Was raiding the bitz box a few years back for Necromunda, only one I found was the old one from the original Necromunda plastic weapons sprue.

The old close combat weapon sprue for Marines had one on so marine players from 2nd usually had a god number lying around.
   
Made in no
Longtime Dakkanaut





 Breotan wrote:
So much for my hope of getting a right hand stub pistol for my Goliaths.

That's a quite simple conversion.
   
Made in gb
Mysterious Techpriest







 Breotan wrote:
So much for my hope of getting a right hand stub pistol for my Goliaths.


They announced (and showed) packs of Goliath weapons just over a month ago: https://www.dakkadakka.com/dakkaforum/posts/list/2640/743059.page

Looks like there might be three packs as well.

Edit: Your probably not going to have to wait long before they are released.

This message was edited 1 time. Last update was at 2018/03/17 12:39:50





 
   
Made in us
Regular Dakkanaut



Massachusetts

 jake wrote:
I'm pretty pleased with these weapon sets, except for the lack of shotguns.


The look of some of the weapons makes me think shotguns are a simple clip and drill away. The melta and flamer in set 1 make me think shotgun conversion with ease.

To be fair - the conversion shouldn't need to happen - because shotguns should be included... but we have what we have.

www.thebolterhole.com - Check out our shop, The Bolter Hole, where our focus is community gaming! 
   
Made in us
Longtime Dakkanaut




Were there articles similar to the Sump Dogs one?

   
Made in no
Longtime Dakkanaut





What articles?
   
Made in us
[MOD]
Madrak Ironhide







Sorry if this has been covered. Will weapon upgrades for Necromunda
be sold through regular shops or mail order only?

DR:70+S+G-MB-I+Pwmhd05#+D++A+++/aWD100R++T(S)DM+++
Get your own Dakka Code!

"...he could never understand the sense of a contest in which the two adversaries agreed upon the rules." Gabriel Garcia Marquez, One Hundred Years of Solitude 
   
Made in us
Major





California

 malfred wrote:
Sorry if this has been covered. Will weapon upgrades for Necromunda
be sold through regular shops or mail order only?


Only mail order from Forgeworld (the UK).

 
   
Made in gb
Calculating Commissar





England

Am I right in saying all the stub guns released in the N17 models so far are stub revolvers? No stub automatics? Would be cool to have the variety, but I can see why they might be wanting to standardise them down for visual recognition purposes.

 ChargerIIC wrote:
If algae farm paste with a little bit of your grandfather in it isn't Grimdark I don't know what is.
 
   
Made in us
[MOD]
Madrak Ironhide







Thanks. So I just gotta wait for that sweet 350 dollar point.

DR:70+S+G-MB-I+Pwmhd05#+D++A+++/aWD100R++T(S)DM+++
Get your own Dakka Code!

"...he could never understand the sense of a contest in which the two adversaries agreed upon the rules." Gabriel Garcia Marquez, One Hundred Years of Solitude 
   
Made in ca
Blood Angel Chapter Master with Wings






Sunny SoCal

Scott-S6 wrote:
Baxx wrote:
Wasn't hand flamer quite hard to get? Was raiding the bitz box a few years back for Necromunda, only one I found was the old one from the original Necromunda plastic weapons sprue.

The old close combat weapon sprue for Marines had one on so marine players from 2nd usually had a god number lying around.


Honestly like 10-15% of the gun holding hands in the 4th gen box are stealer claws, almost all are human hands by a vast majority. And the ones that are claws, honestly it really couldn't be a simpler 'conversion' to get rid of it, about 15 seconds of work with clippers and a sanding strip.

malfred wrote:Thanks. So I just gotta wait for that sweet 350 dollar point.


FW was actually pretty damn reasonable shipping fed-ex to me in Canada, it was 3 pounds. I was actually kind of impressed if anything.

   
Made in no
Longtime Dakkanaut





There has been some reports about announcements from facebook saying that the Escher weapon pdf is correct and overrides earlier publications. It contradicts earlier costs and even the FAQ for the Fear trait.
   
Made in us
[MOD]
Madrak Ironhide







 MajorTom11 wrote:

malfred wrote:Thanks. So I just gotta wait for that sweet 350 dollar point.


FW was actually pretty damn reasonable shipping fed-ex to me in Canada, it was 3 pounds. I was actually kind of impressed if anything.


But...freeeeee

DR:70+S+G-MB-I+Pwmhd05#+D++A+++/aWD100R++T(S)DM+++
Get your own Dakka Code!

"...he could never understand the sense of a contest in which the two adversaries agreed upon the rules." Gabriel Garcia Marquez, One Hundred Years of Solitude 
   
Made in us
Most Glorious Grey Seer





Everett, WA

 H.B.M.C. wrote:
 Breotan wrote:
So much for my hope of getting a right hand stub pistol for my Goliaths.

You didn't think the Escher set would contain weapons for the Goliaths, did you?

I was just lamenting that there was no release for Goliaths given they were also in the main box. Don't get me wrong, I'm happy they released the Escher upgrades, it's just given how long they take between releases I'll be stuck with my hatchet-job conversions for the foreseeable future. :(


 
   
Made in au
[DCM]
.. .-.. .-.. ..- -- .. -. .- - ..






Toowoomba, Australia

I’ve sourced 1mmx1mm rare earth doc magnets for the Escher arms and have already put 2mm magnets in the body sockets for the arms. I was just waiting to see if these kits would be all shoulder attachments, which they are.
Very happy.

2025: Games Played:13/Models Bought:174/Sold:169/Painted:166
2024: Games Played:8/Models Bought:393/Sold:519/Painted: 207
2023: Games Played:0/Models Bought:287/Sold:0/Painted: 203
2020-2022: Games Played:42/Models Bought:1271/Sold:631/Painted:442
2012-19: Games Played:781/Models Bought: 1935/Sold:1108/Painted:704 
   
Made in au
Mekboy Hammerin' Somethin'





Perth, Western Australia

 Waaagh_Gonads wrote:
I’ve sourced 1mmx1mm rare earth doc magnets for the Escher arms and have already put 2mm magnets in the body sockets for the arms. I was just waiting to see if these kits would be all shoulder attachments, which they are.
Very happy.

oooh...you can get 1mmx1mm?? smallest I've seen is 2mmx1mm...

...it's good to be green!  
   
Made in gb
Cackling Chaos Conscript





Oxfordshire

I’d be much more tolerant of the profusion of Hand Flamers in the Escher upgrade packs if we could get a clarification as to whether they should have the ‘pistol’ trait.
   
Made in ca
Stinky Spore




 Lord Fishface wrote:
I’d be much more tolerant of the profusion of Hand Flamers in the Escher upgrade packs if we could get a clarification as to whether they should have the ‘pistol’ trait.


Why would that need further clarification? they clearly don't have the pistol trait under the trait heading in any released material regardless of whether or not they are listed under pistols in the wargear sections.
   
 
Forum Index » News & Rumors
Go to: