Yes I am going to use this as a new incentive to get painting again, plus to buy more of your stuff

What happened with the troll us competition? Who won?

http://www.dakkadakka.com/dakkaforum/posts/list/180/645562.page#7917719 Troll us competition results

A little glimpse in the near future... Upcoming turrets and weapons.
Speaking of turrets. Do You remember about our 10% off promotion for all kind of turrets in our webstore?
http://puppetswar.com/category.php?id_category=154

Are the mounting plates on those your standard diameter for things like the Brick and other turret cupolas?
Do you have a missile launcher for that? Nobody seems to do missiles on turrets that aren't humongous. Something that would shoot the same missiles as a heavy weapon squad not manticore or deathstrike or anything..

Those are looking good.

Two things today. First, new release:
Star Alliance Pads (set of 10)
http://puppetswar.eu/product.php?id_product=454
Fully compatible with previously released shoulder pads, of course



Then... something still being worked upon...
Here you can see a little preview of upcoming new weapon system and some of examples of use. As you can see it is pretty flexible. We are trying now to use these kind of guns as a hand weapons for Strikers
So, do You like it? Any additional ideas?

Clever.

I really like the cupola mount .

Maybe some kind of sentry turret/emplaced heavy weapon mounting

PuppetsWar wrote:
Sorry, to be honest we have no idea if any of our products fit to products made by other companies.

PuppetsWar wrote:

Then... something still being worked upon...
Here you can see a little preview of upcoming new weapon system and some of examples of use. As you can see it is pretty flexible. We are trying now to use these kind of guns as a hand weapons for Strikers
So, do You like it? Any additional ideas?

Replace Ripper's head with a gun. Or, more seriously, you could also place the gun barrels under the arms with the arms holding support handles, sort of like with a minigun. Three guns so he can shoot everyone in the universe.

I'll repeat my earlier question PW.. any chance of getting a missile launcher box to go on that bad boy?

I would love to be able to mount heavy weapons to the backs od my Rippers just like you have shown in that picture. But it would also be nice to have different arms where the weapons are carried under the arm.

Loving the weapon mounts, though they could really use an ammo feed system (at least for the ones that aren't energy weapons) and a camera on the mount somewhere, so that they can be remotely controlled from anywhere inside a vehicle (rather than by an operator forced to look through the viewports of the cupola). Remote weapon mounts are something sorely missing for Space Marine-scale vehicles, so this is a good thing to see.

Received my prize stuff today, once more many thanks to PW!

I'll post a full, pic-filled review later, but to cut a long story short I'm impressed. There's a couple of very, very small bubbles on some pieces, but no worse than any resin I've seen from anyone else, and they're small enough that five seconds and a dab of liquid GS, superglue or even just primer would clear it up. A little flash, but again no more than one would expect from the material, and the details on the parts themselves are very sharp.

Can't wait to get painting these up, and some more Puppetswar products are certainly going into my to-buy list at some point!

Kind of a long shot but does anyone in have a single Barghest Fiend going spare? I would like one for a project I'm working on and it seems easier than buying five and finding homes for the other four

They have some cool shoulder pad previews up on Facebook, including a Judge Dredd style eagle pad. Hopefully they will have armor that could be put together for a Judge Fredd model. Maybe a pistol too.

Hello
Sorry for not posting for more then a week but I was on a short holiday (really, really short)
I will post things which were released or previewd later, but today something fresh.

First assemble of Valhalla Champions!
Inspired by Vikings in the Future concept, our designers were hard working lately, making such miniatures as visible on the photo. Do you like it? Would You like to see some more units made in similar style? If yes, what kind of units should we made?

That's badass.

Must have.

Those are indeed nice!
For other units in this style..specifically the viking thing.. some older veterans with damaged armor. Some more lightly armoured scouts. A priest with all sorts of Nordic runes and ceremonial implements.
Also, a similar concept but maybe a little different would be some berserkers (not Khorne berserkers but maybe they could work for that too..). I do mean something like the original meaning https://en.wikipedia.org/wiki/Berserker
Obviously a chieftan would be cool. Also wolves and crows with cybernetics. Both animals are heavily associated with Norse mythology and would work really well. Maybe even some being ridden. How clever would that be


Actually, if you do decide to make wolves, having some without cybernetics would be nice for people who want them for fantasy... maybe have optional heads or legs in the kit or something..

We will consider everything
Meanwhile - please take a look at one or our Strikers painted by talented Łukasz Grzyb, pro-painter from Poland, known also as C'tan.

Wow, that's awesome!

Man I seriously need to work on my airbrush skills. That's a great showpiece for the model!

That's a fantastic piece. I really like that when I look at it, the piece is very science fiction and not at all grimdark. It reminds me a little bit of Halo.

Hello!
Today we released further part of our terrain range - HEAVILY DESTROYED ROAD PIECES. Set contains two pieces of resin road, which have length of 170mm and could be connected to each other by 105mm wide edge. You can buy this new release here:

http://puppetswar.eu/product.php?id_product=475

it has been a pleasure to watch C'tan improve over the last 5 years on CMON...
he really hit this one out of the park...
lovely green, and a nice little scene...

thanks for sharing...

cheers
jah

That's some damn sexy work, right there.

Hello
Today we have prepared special promotional offer. All MONSTROUS MINIATURES from our webstore are now 10% cheaper - Anthropods, Butchers, Slayers, Cyber Anthropods, Giants, Demons - you can find them all here:
http://puppetswar.com/category.php?id_category=154

Cool zombie jabba

no doggies in the deal - me sad :(

Doggies are not monstrous enough

But take a look at this miniature... Sneak peek in the not so far future. Do You like it? What do You think about it?

I like him - not sure about the shoulder pads, but the rest is 100%.

He looks interesting for sure.

Not a big fan of the shoulderpads either, but I assume those are separate anyway so it's not like that matter much.

Really like those cossack heads you released recently. (I never saw those in this thread). Are there plans for more heads in the future? It would be great to be able to purchase some bare heads with asian (central, eastern, southern or whatever ) features.

That is awesome. Sort of Obi-Wan meets Lion El'Jonson vibe going on.

OK, that chap is pretty bloody awesome! I'm not actually thinking 40k though, swap/remove the shoulder pads and he could fit quite nicely with Infinity's Military Orders!

That head is amazing; the hair, mustache, and beard are perfect.

That is an awesome figure. Probably one of the best faces I have seen. I would love to that painted up.

Forgot to mention that the sword is 100% BA!

Very awesome figure. Looks like a Sci-fi Stormwind soldier. This not so distant future intrigues and interests me.

Guys, we are happy that You seem to like this guy...
So, check this out..


New release today - the one which will be quite popular, we hope. 'Norse Warriors heads' set is available in our webstore now. Set contains ten resin 28mm 'heroic' scale heads in five variants. Perfect for wild warriors.

http://puppetswar.eu/product.php?id_product=476

They are on the shopping list look awesome

I'm mildly disappointed that I converted my Space Wolves to be all women, already. Mildly. Those are fantastic. Head and shoulders (sorry!) above anything else I've seen.

They seem so angry. Not that it’s a bad thing, but it might be nice to see some of them reveling in the glory of battle.

Some of those angry faces would be great Berzerkers!

Hello friends

One more release - HIGH CRUSADE BANNER. Set contains one banner with right palm grip, height of the banner is 65 mm. Available now. We think that it looks... really good. What's your opinion?

http://puppetswar.eu/product.php?id_product=477

PuppetsWar wrote:
Hello
Sorry for not posting for more then a week but I was on a short holiday (really, really short)
I will post things which were released or previewd later, but today something fresh.

First assemble of Valhalla Champions!
Inspired by Vikings in the Future concept, our designers were hard working lately, making such miniatures as visible on the photo. Do you like it? Would You like to see some more units made in similar style? If yes, what kind of units should we made?

Spoiler:

Those do look quite nice. Will they also get a variety of shooting weapons like an over the shoulder missile launcher and arm rotary cannon? They look like they'd be a good analog to the MkXVII armor from the Dorn Heresy (minus the wolfie bits of course).

It is so hot here in Poland that we decided to show creatures responsible for this heat wave. Let us present Fire Demons.
Some of our earlier sculpts, still full of character.

http://puppetswar.eu/product.php?id_product=178

You should do a series of Native American heads. I want to make a classic Deathwing unit from the original Space Hulk fiction (Cloud Runner, Lame Bear, Weasel-Fierce, Two Heads Talking, etc.)....heck, I'm considering taking up sculpting myself just so I can bring this project to fruition.

Hot Damn

Regarding the WIP at the bottom of the last page - I'll echo several other posters in saying that you hit it out of the park, EXCEPT the shoulder pads. I think they stick out too far and are a bit awkward looking - seeing them with less "thickness", if that makes sense, would really help a Lot.

If you could make that tweak (and you can also offer different types of pads) man, that would be a really good seller, I think.

 Fango wrote:
You should do a series of Native American heads. I want to make a classic Deathwing unit from the original Space Hulk fiction (Cloud Runner, Lame Bear, Weasel-Fierce, Two Heads Talking, etc.)....heck, I'm considering taking up sculpting myself just so I can bring this project to fruition.

They do actually have Native American heads. Or at least heads labeled as such.

http://puppetswar.com/product.php?id_product=32

Unfortunally they don't look good at all IMO. Something is wonky about them.

I just wanted to show our Native Americans

Well, let me show something other then. High Crusader. In fact, a set of five such High Crusaders will be available this week. Do You like it?

PuppetsWar wrote:
I just wanted to show our Native Americans

Well, let me show something other then. High Crusader. In fact, a set of five such High Crusaders will be available this week. Do You like it?

wow.....

Yeah, that's pretty cool.

High crusaders will be available later this week, but starting today you can buy a new set of heavy armour:

'HEAVY ARMOUR TYPE "TERMOS"' is available in our webstore now.

http://puppetswar.eu/product.php?id_product=478

Hey Puppets War peeps, a friend and I are going to put in an order soon for a few bits and pieces. Is there any way I could purchase a single Barghest?

How does the TERMOS armor differ from the RIPPER armor?

I'd really like it if the large front cod piece was separate...

The cod piece kills it for me.

None shall molest my privates!

Gotta protect that gene-seed.

 Treadheadz wrote:
How does the TERMOS armor differ from the RIPPER armor?

I'd really like it if the large front cod piece was separate...

H series environmental regulators keep the TERMOS much better insulated from outside conditions than the more common RIPPER suits.

Agreed, please get rid of the tabard or make it an optional, separate piece that can be left off! You will have much broader appeal that way.

 Paradigm wrote:
OK, that chap is pretty bloody awesome! I'm not actually thinking 40k though, swap/remove the shoulder pads and he could fit quite nicely with Infinity's Military Orders!

Was thinking exactly the same! I'd probably leave the lionpads though.

Single bargheist... Hmm... Please contact me at @ communitypuppetswar@gmail,com we will think it over.


Some of the bits from our High Crusader, shown on the photo few days ago, are already available, like High Crusade Helmets.
http://puppetswar.eu/product.php?id_product=274

So, just to repeat myself then...

What are the differences on the Termos vs Ripper?

Will you consider a future release on the Termos/Ripper without the large cod armour piece?

Time for Crusade!
It is our pleasure to inform that High Crusaders miniatures are available now. You can buy them in two different sets.
First - 'High Crusade Team' - contains five miniatures:
http://puppetswar.eu/product.php?id_product=479

Second is 'High Crusade Team' and consists of 20 figures:
http://puppetswar.eu/product.php?id_product=480

Bodies and arms have 3x1mm holes for mounting magnets, which allows for simple assembly and disassembly of hands and weapons.

Nice!

Any rough idea of when the Knight guy previewed two pages back will be released? Will he be on his own, or part of a pack?

 Treadheadz wrote:

So, just to repeat myself then...

What are the differences on the Termos vs Ripper?

Looks like they're going with 'Termos' as the name for the base armour, with different names for the different configs. So the Ripper is Termos armour with the close combat claws, Paladins are Termos armour with sword and shield, etc...

Why are the high crusaders posed so damn awkwardly?

@Paradigm - all I can say is 'soon'. He will be available as a part of bigger set probably.

@Treadheadz - sorry, just saw your question. Termos is name of the armour, Rippers (or Ripper) is a name for a unit of soldiers in Termos armour.

I would like to mention, that High Crusaders may be armed not only with widowmakers (as the ones shown yesterday). You can freely use all our weapons and arms, for example these Power Halberds.

http://puppetswar.eu/product.php?id_product=48

 Olgerth Istaarn wrote:
Why are the high crusaders posed so damn awkwardly?

My thoughts exactly, that put me off from ordering them

You can pose them as You want - well, almost... Arms, weapons, etc. may be easily magnetized as they have 3x1mm holes for magnets.
You can freely mix all of our arms and weapons.

To Puppetswar:

I contacted you on your website about missing legs for my Barghest Fiends. I never received a reply. Could you please PM me so we can figure out how to get me the missing parts? Thank you.

Yep... We are working on something big

OOh, shiny...

I have a feeling that this is going to be a pretty awesome model!

Oh..next order to them looming on the horizon... good excuse to finaly get the new shoulder pads too.

will the pilot be available also separately? that would be cool...

Regarding pilot - I don't know yet. It is possible probably.

But today we have something other. Crusader armour "Termos" type are available now:

http://puppetswar.eu/product.php?id_product=481

thermos can or not?


Those knightly armour looks interesting!

Crusader Armour 'Termos' type may be fitted with many different parts from our catalogue. We think that Temistokles heads and shields will look good paired with Crusader armours.

http://puppetswar.eu/product.php?id_product=89

http://puppetswar.eu/product.php?id_product=143

(and set of heads is on sale now)

Oh those helmets are awesome! Don't know why I haven't seen them before. Spartan-esque Rippers would be epic!

Those would make an amazing and unique grey knight force.

Waaay too much going on on these new armors, and the sample mini looks entirely too square/squatty.

Space Spartan helmets, on the other hand, look pretty damn amazing.

Regarding 'square' miniature, I think it is the angle of the photo.

New release today.
Further set of heads:
Vampire Heads. Set contains 10 28mm 'heroic' scale heads in five variants.
http://puppetswar.eu/product.php?id_product=482

Great I just placed an order and I so would have added those heads to it

Our big thing is still growing...

That is big.

Oh, wow. Bigger than I thought.

So are we aiming for warhound size with this?

That things Big...

yeahyeahYEAH!

A not warhound?

No,no,no!

Man, I love coming to this thread after a month or two and seeing all the new stuff - makes my wallet start to sob too.

I think we - as company - like your reactions to 'something big'"

And it is definitely not a warhound. Just take a look here...

Nice. A Striker Mech. You could call it the Striker Assault Walker, or SAW for short.

That top head screams Adeptus Mechanicus conversion potential!

I see a transformer but that's just me I guess.

Better as a cockpit than a head.

Oh that looks good. Can't wait to see the whole thing.

Yes and we need size comparison and big turtle shoulder pads!

 Commander Cain wrote:
That top head screams Adeptus Mechanicus conversion potential!

The other head is my personal favorite. It will for sure me my choice when I build my "FREEBLADE" knightly mecha...

Pads... Someone said pads?

Ok, two new sets

Hot Rod shoulder pads available in regular and 'Termos' size.

Set of Termos size pads contains 5 pads:
http://puppetswar.eu/product.php?id_product=484

Set of Regular size pads contains 10 pads:
http://puppetswar.eu/product.php?id_product=483

I wish you guys made power scythe

PuppetsWar wrote:
Pads... Someone said pads?

Ok, two new sets

Hot Rod shoulder pads available in regular and 'Termos' size.

Set of Termos size pads contains 5 pads:
http://puppetswar.eu/product.php?id_product=484

Set of Regular size pads contains 10 pads:
http://puppetswar.eu/product.php?id_product=483

do these have the normal internal round section to fit on most arms? or are they specific for the models pictured? ... was happy with my last order (though it took a while to prepare and get shipped) will be placing another order in the upcoming month and am now also interested in some of these depending on the internal recess and fit.

Very nice.

 RedFox wrote:
I wish you guys made power scythe

Kromlech showed a pic of a bunch of stuff they were working on a few weeks back, scythes were in there.

Well, no power scythes... yet... But we can offer some little helpers

Blessed Omniretinue
http://puppetswar.eu/product.php?id_product=95

The Omniretinue are so cute and grim-dark.

Lots of character to them. Perfect for the recent Knight releases, or for SOB/ Inquisition /Grey Knights or anyone else with ecclesiastic themes.

Today something for declared royalists and those who like a little bit of staginess

Lion Khan Shoulder Pads Termos size (5 shoulder pads)
http://puppetswar.eu/product.php?id_product=486

Lion Khan Shoulder Pads (10 shoulder pads)
http://puppetswar.eu/product.php?id_product=485

Our Art Team has decided to show more details of the 'Big Thing'.

Looking good so far, can't wait to see more.

Is anyone else sort of hoping that 'The Big Thing' is actually the official name for it...?

It's looking fantastic, though.

Love those lion pads, too.

Do those big lion pads fit on ripper sized suits too?

Any chance of there being a shoulder pad variety pack in the future? Something with one set each of a couple different designs? That would be awesome.

"Do those big lion pads fit on ripper sized suits too?" Yep, they are in two different sizes, regular one and 'termos' size.

And I decided to show one of my personal favorite models from our catalogue:

Doom Jetbiker:

http://puppetswar.eu/product.php?id_product=346

The chaos/order and land/air biker variants are all amazing (speaking as someone who has been working with your bike models since what I believe was the first version). Great models.

That Omniretinue is so incredibly cool, I love it!

I just bought some old-school metal cherubs from Foundry to use as servo skulls and objective markers, but now I might have to expand my collection of flying baby angels...

Whoa, that jet bike and the teasers of the "big" creation are both really cool!

Guys, I'm so glad reading your comments

And speaking about making one set with many different shoulder pads inside - very nice idea, we will probably make such set. Naturally, today's beauties will be inside too

Today's new releases:

IRON WOLF SHOULDER PADS TYPE 'TERMOS'
http://puppetswar.eu/product.php?id_product=489

IRON WOLF SHOULDER PADS
http://puppetswar.eu/product.php?id_product=488

Yes, we know that those are over the top but those shoulder pads looks awesome

Nice! And another tease of that awesome Knight!

Got my latest order just a few bits a couple of small issues hopefully will get sorted quickly, but will say the new pads are amazing I got one set to try and will be back for more they were damn amazing great shape thickness and detail


The Norse and Cossack heads are stunning as well full of character, along with the trooper and bonnie hat heads just superb.

We decided to create something that will help to diversify units, how do you like this concept?
Do you prefer classical or more futuristic style?

As I said on FB classic is my favourite but i see uses for both.

It would really depend but these are both very welcome additions.

I definitely prefer the Roman numerals. How awesome!

Great idea. Do both types of numerals. and all the way up to 10 - although VIII might be a squeeze

 Clang wrote:
Great idea. Do both types of numerals. and all the way up to 10 - although VIII might be a squeeze

IIX would work in a pinch, if they couldn't fit VIII

Personally I like the more high tech vibe of these designs. The more 'classic'/gothic' designs feel a bit contrived, but that's just my own little opinion.

Classsssic.

Absolutely "classic". The only reason we use Roman numerals so much in the modern day is because they're cool.

Meanwhile, you're one of my favourite sculptors. Any chance of you doing some "Space Elves" in the future? The problem with "Space Elves" by "other companies" is that they're really, really badly proportioned. Giant balloon heads and big meathook hands and feet make "Space Elves" look a lot less cool. Nobody makes any alternatives, though, which is really sad.

Regarding Space Elves... We will try to fully flesh out our existing factions first I think. It was discussed some time ago and the conclussion was that we will develop existing lines first.

And today's new release is related to the old song...

When the toxic smoke is going down... Excuse me my poor voice, too much chemicals in the air

New release, TOXIC OFFICER HEADS
http://puppetswar.eu/product.php?id_product=490

Ah, well. Speaking of expanding your existing lines, could we get some nice lady soldiers? It'd be nice to have some gritty female soldiers in sci-fi, especially in the aesthetic of your existing troopers.

Lady soldiers, very nice idea. Passed to the Art Team. Let's hope it will get fleshed out

And here is one of the our very first releases, Daemonic Beast.

http://puppetswar.com/product.php?id_product=3

 Frozen Ocean wrote:
Absolutely "classic". The only reason we use Roman numerals so much in the modern day is because they're cool.

Meanwhile, you're one of my favourite sculptors. Any chance of you doing some "Space Elves" in the future? The problem with "Space Elves" by "other companies" is that they're really, really badly proportioned. Giant balloon heads and big meathook hands and feet make "Space Elves" look a lot less cool. Nobody makes any alternatives, though, which is really sad.

Really? Jes Goodwin makes almost all the Eldar sculpts, and he's one of the best sculptors and concept designers in the industry (ever IMO). Wouldn't mind some more competition though, mantics efforts (the only alternative I'm aware of) don't really inspire...

PuppetsWar wrote:Lady soldiers, very nice idea. Passed to the Art Team. Let's hope it will get fleshed out

Awesome! I look forward to it!

I was very much speaking of grunt soldiers, but that said, there are a lot of people out there (myself included) who are desperate for some kind of power-armoured battle nun... Perhaps with a heavy Gothic/Knightly/Catholic Church theme, even. Just a thought.

Mymearan wrote:Really? Jes Goodwin makes almost all the Eldar sculpts, and he's one of the best sculptors and concept designers in the industry (ever IMO). Wouldn't mind some more competition though, mantics efforts (the only alternative I'm aware of) don't really inspire...

Oh, don't get me wrong, I love them conceptually and artistically, and I'm not saying the sculpts are actually bad. It's just that I really, really, really despise "heroic scale". I love the Eldar for their lore and their aesthetic, and it kills me that the only option for infantry are GW's official, ludicrously-proportioned products. Unlike the Imperial Guard, Forge World make no better-scaled alternatives (Death Korps, Elysians, etc) and there are no alternatives (whereas the IG can use any sci-fi or even historical humans converted properly). Unlike Space Marines, the models can't be simply chopped up and put back together (I'm "tallscaling" all of my Marines) to fix their issues. They're just so damn chunky!

Of course, there's also those awful and ancient models they have for Aspect Warriors. The sad thing is that all I'd need would be a Guardian alternative; anything else could reasonably be converted up from those as a base. It's extra sad because GW's models are going slowly away from "heroic scale" as time goes on (see the Skitarii and the latest Eldar Autarch), but they didn't make new Guardians or Aspect Warriors this past release.

I see! Yeah a new Guardian sculpt is sorely needed, and some Forgeworld Eldar infantry would be amazing. Anyway, that's neither here nor there, sorry for the OT Puppet Wars guys

It's on topic! It was why I bemoaned the sorely lacking state of the Space Elf market!

EDIT: I love the majority of things PuppetsWar does, but the human infantry are really great. If the far future yielded some "Space Elves" of that quality and scale, I'd be a very happy person. I'll be content with cool mechs and such for now, though.

Today nothing new, just a friend of recently showed Doom Jetbiker.

Equally disgusting I think, equally cool too:

Domm Biker
http://puppetswar.com/product.php?id_product=349

Art Team doesn't rest at all. Well, maybe a little bit.
Further photo of upcoming 'Big Thing'.

That 'big thing' is shaping up to be epic!

Did you guys announce the winners of your summer painting challenge anywhere? I entered, and while I don't expect to win, I'm intrigued to see what did!

Looking brilliant!

Hey PW (or anyone else) -- hints on a decent method to fill in the empty spaces where the glass/whatever would be on the various windshields/canopies on these models? Looking at the big thing and realizing I have a trio of fliers or so awaiting closed canopies before I start painting them.

I used pieces cut from a blister pack on this one - just cut to shape, and stick into the frame with superglue.

Any similarly thin, clear plastic would do.

Oooh, the Big Thing is looking more and more excellent! Are you making a helmet/head in a similar style to your Enforcer? It'd make them fit together aesthetically, as well as just looking really cool.

 insaniak wrote:
I used pieces cut from a blister pack on this one - just cut to shape, and stick into the frame with superglue.

Any similarly thin, clear plastic would do.

Ahhh, that's perfect. I've been trying to cut plasticard to size, because I apparently hate myself. Thanks!

Anyone wanting to put clear plastic on a canopy, you can use craft glue to stick it on there without it fogging or, if you really want to go that extra mile, head to an auto parts store and buy some silicon adhesive. It's the stuff they use to attach rearview mirrors and after it cures (it does take a long time to cure) it is clear. I bought a tube for $5 or $6 at Pep Boys a couple weeks back.

I am ready to buy this, seriously awesome looking model!

I was pondering getting my friend some Centurions for his birthday, but both he and I laugh at the GW versions. Do Puppetswar's Centurion alternatives work well? If not Puppetswar, is there another good third party alternative?

Paradigm - it was not announced yet. But it is not forgotten

But for now... Winter is coming! And Red Army with it.

Red Army Orc Heads
http://puppetswar.com/product.php?id_product=30

Murrdox wrote:
I was pondering getting my friend some Centurions for his birthday, but both he and I laugh at the GW versions. Do Puppetswar's Centurion alternatives work well? If not Puppetswar, is there another good third party alternative?

I like PW's. Scibor just previewed something too but it's extremely ornamental, so if your friend isn't using super-decorative stuff PW is probably going to be where it's at for you.

New release!
Ninja heads for all your ninja needs Set of ten resin 28mm 'heroic' scale heads.

http://puppetswar.com/product.php?id_product=491

They actually look a lot better on the mini then I was expecting when I saw the post title ! They kinda look like the spec ops balaclava type covers you seen worn a lot, or flash hoods.

I've got quite a few of your heads and really like them, what I am really looking for at the moment though are some "inspired" by the original Rogue Trader Imperial Guard, smaller helmets, chin guards, visors and glasses.
How about something like that ?

Something like Tactical Troopers Heads?
http://puppetswar.com/product.php?id_product=341

|

or Space Guardsmen Heads?
http://puppetswar.com/product.php?id_product=183



Original RT heads were lower tech I think and they are easthetically a little different then our current stuff. We would like to fully flesh out all existing ranges before making something new. But nothing is set in stone

So, something not yet available first:



And a new release from today:

another set of shoulder pads, this time something for heavier armour.
AIRSTRIKE CAV PADS TYPE 'TERMOS'
http://puppetswar.com/product.php?id_product=492

How cute!

PuppetsWar wrote:
So, something not yet available first:

Is the hooded head on the right already out or is that a sneak preview too? I would very much like those heads

Correct, not available yet.

And let me share my current mood today... I just found perfect item in our catalogue to represent it. And it is appropriately named: Rolling Slaughter.
Wrrrrrr!

http://puppetswar.com/product.php?id_product=70

Ooh my mechanicus army would very much like to get their hands on that gun platform and those heads!

Another thing I would love to see are some robot heads that could make your troopers look like drones much like those hooded ones only with a more blocky shape to them.

For your big guy y'all are working on, do you think you might have any alt legs for it? If there were some robot spider legs that could fit a certain robot knight..

New release today, two actually:

IRON EAGLE SHOULDER PADS TYPE 'TERMOS'
http://puppetswar.com/product.php?id_product=494

IRON EAGLE SHOULDER PADS
http://puppetswar.com/product.php?id_product=493

Upcoming new heads

Oh man ... and I just finished my skull-headed LOTD too.

These heads will look awesome painted up.

I wonder how those heads scale with raging heros?

I feel a ghost rider girl or two coming on

Demon bike on the last page, flaming skull heads on this one...


Doomrider!

PW, you have got to do a biker body with spikes and a classic chopper style motorcycle.. those flaming skulls are too awesome to not have a Ghost Rider to throw them on!!!!

@MLaw... Cool idea... Problem is, we have too many of them I think But something definitely to think about.

And would like to remind that our bike models are not limited to Mankind faction only...
Cyber bike from Cyber Invaders faction:
http://puppetswar.com/product.php?id_product=78

Could you give a width (and maybe approximate diameter) of the Rolling Slaughter release?

PuppetsWar wrote:
Upcoming new heads

These are terrific! So cool.

Skulls for the Skull Pads!
New releases:
IRON SKULL SHOULDER PADS TYPE 'TERMOS'
http://puppetswar.com/product.php?id_product=496

IRON SKULL SHOULDER PADS
http://puppetswar.com/product.php?id_product=495

Oh man you guys are just killing it!

Skull helmets, skull shoulder pads... now we need armour made entirely from skulls, carrying a gun that fires explosive skulls, powered by burning powdered skulls in skull-shaped braziers, standing on a base made entirely from skulls, in the shape of an enormous skull...


Oh, gak, if any GW employees read this, I was joking! I was joking! Don't make this...

I fear it may be too late...

 Paradigm wrote:
Skull helmets, skull shoulder pads... now we need armour made entirely from skulls, carrying a gun that fires explosive skulls, powered by burning powdered skulls in skull-shaped braziers, standing on a base made entirely from skulls, in the shape of an enormous skull...


Oh, gak, if any GW employees read this, I was joking! I was joking! Don't make this...

I fear it may be too late...

In my mind, I"ve already started thinking of what pieces would be necessary to build this OTT masterpiece. I believe my next army, the Skull Lords of New Skulldera might've just been born

 MLaw wrote:

 Paradigm wrote:
Skull helmets, skull shoulder pads... now we need armour made entirely from skulls, carrying a gun that fires explosive skulls, powered by burning powdered skulls in skull-shaped braziers, standing on a base made entirely from skulls, in the shape of an enormous skull...


Oh, gak, if any GW employees read this, I was joking! I was joking! Don't make this...

I fear it may be too late...

In my mind, I"ve already started thinking of what pieces would be necessary to build this OTT masterpiece. I believe my next army, the Skull Lords of New Skulldera might've just been born

Honestly I was also trying to figure out how I could make such a model. The armor would be the hard thing for me but I think I could do almost all the other bits!

 SickSix wrote:

 MLaw wrote:

 Paradigm wrote:
Skull helmets, skull shoulder pads... now we need armour made entirely from skulls, carrying a gun that fires explosive skulls, powered by burning powdered skulls in skull-shaped braziers, standing on a base made entirely from skulls, in the shape of an enormous skull...


Oh, gak, if any GW employees read this, I was joking! I was joking! Don't make this...

I fear it may be too late...

In my mind, I"ve already started thinking of what pieces would be necessary to build this OTT masterpiece. I believe my next army, the Skull Lords of New Skulldera might've just been born

Honestly I was also trying to figure out how I could make such a model. The armor would be the hard thing for me but I think I could do almost all the other bits!

Puppetswar has done a pretty good job of not over-skullerizing stuff so I would say you'd have to look at other manufacturers. I'll only give a hint, Kabuki has some as do old GW Nightlords. Old Chaos Plasma ended in a skull and there are swords with a giant skull on the blade. This is happening, thanks Puppetswar!

 MLaw wrote:

 SickSix wrote:

 MLaw wrote:

 Paradigm wrote:
Skull helmets, skull shoulder pads... now we need armour made entirely from skulls, carrying a gun that fires explosive skulls, powered by burning powdered skulls in skull-shaped braziers, standing on a base made entirely from skulls, in the shape of an enormous skull...


Oh, gak, if any GW employees read this, I was joking! I was joking! Don't make this...

I fear it may be too late...

In my mind, I"ve already started thinking of what pieces would be necessary to build this OTT masterpiece. I believe my next army, the Skull Lords of New Skulldera might've just been born

Honestly I was also trying to figure out how I could make such a model. The armor would be the hard thing for me but I think I could do almost all the other bits!

Puppetswar has done a pretty good job of not over-skullerizing stuff so I would say you'd have to look at other manufacturers. I'll only give a hint, Kabuki has some as do old GW Nightlords. Old Chaos Plasma ended in a skull and there are swords with a giant skull on the blade. This is happening, thanks Puppetswar!

Oh god, what have I done?

I think I need to purge some of the recent notes here, where is my skull-topped hammer of skullwrath?

Joking aside... Something big...

Classified Project X, a.k.a. The Big Thing.
Which version do You like most?
If You want to propose a suitable name for this... thing, go ahead!

I wouldn't be able to resist naming that thing either cuddles or mister tiddlywinks. Fairly sure that's not the suggestion puppetwars's crack marketing team is looking for though

That. Is. Totally. Fething. Awesome.

Though if you're looking for a name/nickname, 'Death on Two Legs' works, I think!

I'd love to see the break down in parts for those legs... and if they are nice and segmented they might be a good alt for some other legs for a certain big robot with super static legs.
2 sets and I might have some spider legs : P

Wow PW. That's freaking amazing.
lol, and now I'm thinking of using those big skull shoulderpads to make that thing a giant skull codpiece. For real though, is that out yet? I didn't see a link (will check the store in a second).

I have a few questions if you could please answer:

On the last picture over the top of the battlecannon type thing, what is that piece of resin? It's hard to tell at that angle for me.

Does that guardsman have a new helmet that we haven't seen before?

Do you know if this is closer in scale to the GW Knight Titan or the Dreamforge Leviathan?

Really fantastic work guys. Hopefully it also means more of this kind of thing in the future?

My favorite combinations are the flame weapon and the cannon with the cockpit. It reminds me of a Mechwarrior Dragon mech with that loadout

My name suggestion: The Purger

Sweet baby jesus, that thing is awesome...


Prefer the first head and the cockpit version over the second head, but I would be really hard pressed to choose between those two.

A couple of nit-picks - The elbows look a little weedy. I think I would prefer to see some more hydraulics or something there to bulk them up a little.

And I'm not a fan of the hands holding the weapons. With the weapons mounted into the bottoms of the forearms anyway, the hand seems redundant and looks a little awkward. I would probably convert it to remove the hands and mount the weapons directly into the forearms.

Looks like a lot of fun to build, though, and would look awesome on the table. I'll take 5!

Holy moly! Wow.

The first weapon loadaout is super sexy! But I really like the second head option the best. The cockpit would be my 3rd choice. But honestly I want one of each!

How about 'Purifier' ? I like Phallanx as well.

Excellent model! A must-buy for me for sure! I say keep the arms, makes him look more classic mecha.

I dub him the Dominator, in reference to you-know-who. Matches his silhouette pretty darn close

 insaniak wrote:
...And I'm not a fan of the hands holding the weapons. With the weapons mounted into the bottoms of the forearms anyway, the hand seems redundant and looks a little awkward. I would probably convert it to remove the hands and mount the weapons directly into the forearms.

Agreed, the hands need to be optional - for some armies, they'll be perfect, but will just look wrong for others. Hmm, can't think what else to put there instead though, other than (a) a targeting sensor thingy, or (b) an auxiliary ammo box or power pack (which might not suit all weapons), or (c) another gun

that's crazy amazing.

Sweet stuff

 Clang wrote:


Agreed, the hands need to be optional - for some armies, they'll be perfect, but will just look wrong for others. Hmm, can't think what else to put there instead though, other than (a) a targeting sensor thingy, or (b) an auxiliary ammo box or power pack (which might not suit all weapons), or (c) another gun

Just put the gun there...

You've made a Skeletor head!
I never realised I needed one until I saw you made a Skeletor head!
I have no idea what to use it on, but I need a Skeletor head!

PuppetsWar wrote:
I think I need to purge some of the recent notes here, where is my skull-topped hammer of skullwrath?

Joking aside... Something big...

Classified Project X, a.k.a. The Big Thing.
Which version do You like most?
If You want to propose a suitable name for this... thing, go ahead!

The WalletKiller, probably.

Good idea to have either a cockpit or a robot head. Is there a replacement bit for the hand part with the guns, something like a sensor array for the gun maybe?

I love the first head! Awesome model!

So how tall is it specifically?

Amazing job folks, well done!

Nice. I'd go with something like "Zeus class walker/strider" for the name, or maybe just Big Bertha.

I dub thee BlasterMaster.

I definitely need one of these in my life.

I still say SAW (Striker Assault Walker) is the best name for this beastie.

 prowla wrote:


The WalletKiller, probably.

Come on, this has to be it's name!

Looks like Tau meets Pacific Rim.

I need one with cockpit, gatling (but no silly hand) and power fist.

Call it the Coyote


The Second head option could be the "Tango" variant.

Guys, keeps names coming, some of them are really interesting.

Meanwhile, two new releases for today:

KRAKEN SHOULDER PADS TYPE 'TERMOS'
http://puppetswar.com/product.php?id_product=498

KRAKEN SHOULDER PADS
http://puppetswar.com/product.php?id_product=497

I've always thought "Liberator" has a certain appeal to it

Renovator...?

Aerator?

Lynx assault walker/biot

Or, because acronyms are boss: 'VENGEANCE' walker (Vehicular Enhanced Nanotech Governed Entry And Neutralisation Combat Engine)

PuppetsWar wrote:
Guys, keeps names coming, some of them are really interesting.

Meanwhile, two new releases for today:

Spoiler:

KRAKEN SHOULDER PADS TYPE 'TERMOS'
http://puppetswar.com/product.php?id_product=498

KRAKEN SHOULDER PADS
http://puppetswar.com/product.php?id_product=497

PuppetsWar wrote:
Which version do You like most?

Head #1 (aka 'All the Lenses') is my fav, and I think I'd prefer integrated guns on the gun arms, hands gripping controls don't totally do it for me.

But those skulls heads + kraken pads totally do! Awesome stuff, pretty much inevitable that I do some straight PW CSM

- Salvage

Kraken Shoulder Pads??? YASSSSSSS

I just wish they were shaped more like the actual GW pads. :/

Well, if you've always wanted a "Sons of Chthulu" SM chapter, you better get kraken'.

a) squid pads > hydra pads for the XXth.
b) First head is my favorite, although having the cockpit opens it up to a lot more settings and armies.
c) Agree on: weedy elbows, hands need to be optional or just not be there (prefer the latter myself)
d) Name: The Constancy (official reason: a constant bulwark and reminder of the people's power. Soldier's reason: constantly breaks down)

I'd call it something like the "Prosecutor" or some other law-themed name to carry on from "Enforcer".

I still think we need a Big Thing-scaled Enforcer-style head with a flat, pointed visor. It's one of the main reasons I bought an Enforcer in the first place!

I vote for calling it a / the Liberator.

As far as heads go, I like the second the most closely followed by the third. The first doesn't really appeal to me, but I'm also not much of a fan with regards to the Tau aesthetics. Also I'm an oddity in that I love the hands.

So, something to further wet your appetite..



And someone asked about dimensions of Rolling Slaughter: lenght 85 x width 70 x height 55 mm

Jump unit?

Ooh nice! Will he be getting some secondary boosters on his legs as well? Something that big is gonna need a lot of propulsion!

 insaniak wrote:
Sweet baby jesus, that thing is awesome...


Prefer the first head and the cockpit version over the second head, but I would be really hard pressed to choose between those two.

A couple of nit-picks - The elbows look a little weedy. I think I would prefer to see some more hydraulics or something there to bulk them up a little.

And I'm not a fan of the hands holding the weapons. With the weapons mounted into the bottoms of the forearms anyway, the hand seems redundant and looks a little awkward. I would probably convert it to remove the hands and mount the weapons directly into the forearms.

Looks like a lot of fun to build, though, and would look awesome on the table. I'll take 5!

I agree with all of this!

Very interested in this kit, I hope it comes with lots of little weapon options for the various bits, although I know arm weapons might be sold separately.

Model will be available with optional weapons of course, probably other bits too. Height of the model will be about 15 cm.

And we'd like to remind that we produce little brother of upcoming ........ Big Thing. It is already available
Enfrocer Battlewalker
http://puppetswar.com/product.php?id_product=322

I need to get my stuff set up already so I can build and paint my Enforcer One of my favorite models

PuppetsWar wrote:
I think I need to purge some of the recent notes here, where is my skull-topped hammer of skullwrath?

Joking aside... Something big...

Classified Project X, a.k.a. The Big Thing.
Which version do You like most?
If You want to propose a suitable name for this... thing, go ahead!

Spoiler:

Those are cool！
Your a Polish company otherwise you could have started a new line of giant robots called Battleczech


You could call it the Pilecki Mark I

Or The Warsaw?
(Deliverance, G.O.D. (Ground Offensive/Defensive) walker)

If the little one is the Enforcer, the big one should be the Judicator.

New release
Iceberg Troopers Heads
http://puppetswar.com/product.php?id_product=499

Man, I got excited thinking they might be Parka hoods.

totallly with you MLaw... these look rather underwhelming...

I might put these on my Valhallans

I feel like the caps should be slightly taller.

Nice, but need some variety in hood/hat styles.

With the recent release of certain video game... this product should come in handy...
Orc Football Gang
http://puppetswar.com/product.php?id_product=353

Now yer talkin!

I'm in love...

Can I sell my soul for a decent High Elf team?

It depends on the going rate for souls... And... is it stained with sins?

And speaking of souls and similar themes...

Halloween is coming...
INSTANT DEATH/CYBER OR GRIM REAPER
(with his more modern face on the photo)
http://puppetswar.com/product.php?id_product=136

Holy crap! How tall does that stand?

Oh baby!

 Jimsolo wrote:
Holy crap! How tall does that stand?

According to the product page, " 38mm dimension from feet to eyeline".

 Tannhauser42 wrote:

 Jimsolo wrote:
Holy crap! How tall does that stand?

According to the product page, " 38mm dimension from feet to eyeline".

Shucks. Too short.

38mm as it was said. He is practically crouching



One new release today...

Another heads in our range this time for Colonial Troopers:
http://puppetswar.com/product.php?id_product=500




...and... Are You afraid of Demons?

Oh, chaotic rippers. Nice!

Available tomorrow

Here we tried something more heroic, what do you think?

I hope you do a second set with just a couple more designs.
Those are great though!!!
Gah, I have to put in an order with you guys before the stuff I wants adds up to a house payment


Automatically Appended Next Post:
Oh, also.. is there a release date for the big thing?

Well, no release date yet... but please read below...

First - new release:

Hooded skulls are already available.
Who want to add some grim look to his forces?
http://puppetswar.com/product.php?id_product=501



then...

We run small contest on our Facebook profile here: https://www.facebook.com/159776737387320/photos/a.192205597477767.49794.159776737387320/1024214510943534/?type=3&theater

You have a chance to win BIG THING there. Rules are written below too, but please NOTE - this is FB contest only.

Make us laugh (and win this BIG THING doing this)!

We are pretty dreary now, because of all those Polish autumn stuff, low temperature, fallen leaves etc.... We need your help - cheer us up! Let us see if you can maintain a healthy distance from yourselves doing it. Please in comments write some joke about your nationality or nation.

We will hand pick a winner from the comments with most likes. The winner will receive FREE model of this giant robot with optional accessories (weapons, head, etc) of his choosing.
Only one joke for user so let it better be good one.
You have one week.

If someone from Dakka wins that, then for the love of God we need a full blog of the painting and modeling process!

On the subject of contests, did I miss the winners announcement for your last painting challenge? I think I asked about it last month after entering, but don't recall seeing anything more on it?

Puppetswar - Some of us have a problem on Facebook that prevents posting on company pages. I can't and I know there are others with the same issue..
Whoever wins that is lucky either way, it's fantastic!

I know you guys get asked this kind of thing all the time but any chance of a scale shot with GW Knight Titan or Riptide or other big thing? I figure it's a long shot but it would be great to see how it stands next to those.

 MLaw wrote:
Puppetswar - Some of us have a problem on Facebook that prevents posting on company pages. I can't and I know there are others with the same issue..

Are you morally opposed to it or have you been blocked for some reason or...something else?

 Alpharius wrote:

 MLaw wrote:
Puppetswar - Some of us have a problem on Facebook that prevents posting on company pages. I can't and I know there are others with the same issue..

Are you morally opposed to it or have you been blocked for some reason or...something else?

No, it's a bug. Facebook tech support tried to fix it and for a few months it was working again then it just stopped. I miss out on a lot of contests like that. Sometimes I get errors just trying to "like" something. They suggested at one point to just create a new FB page but a lot of my professional art is tied through there and some of my business contacts.

Guys, sorry to hear that some of You can't use Facebook but this time we must run it only there - part of the contest is popularity of jokes (likes).

And new releases for today - lots of them to be honest. Twelve sets of shoulder pads with Roman numbers. There are sets with I-V numbers available now, each number in two variants - regular and 'Termos' size. Regular size sets contain 10 pads, 'Termos' size sets contain 5 pads. Please note that 'Hierarchy' sets contain pads with numbers from I to V and there are two sets with pads of regular and 'Termos' size.

Photos show 'Hierarchy' sets and example of use on Termos and Striker models.


http://puppetswar.com/product.php?id_product=502 Primum Squad Pads

http://puppetswar.com/product.php?id_product=503 Primum Squad Pads type 'Termos'

http://puppetswar.com/product.php?id_product=504 Secundus Squad Pads

http://puppetswar.com/product.php?id_product=505 Secundus Squad Pads type 'Termos'

http://puppetswar.com/product.php?id_product=506 Tertius Squad Pads

http://puppetswar.com/product.php?id_product=507 Tertius Squad Pads type 'Termos'

http://puppetswar.com/product.php?id_product=508 Quartus Squad Pads

http://puppetswar.com/product.php?id_product=509 Quartys Squar Pads type 'Termos'

http://puppetswar.com/product.php?id_product=510 Quintus Squad Pads

http://puppetswar.com/product.php?id_product=511 Quintus Squad Pads type 'Termos'

http://puppetswar.com/product.php?id_product=512 Hierarchy Shoulder Pads

http://puppetswar.com/product.php?id_product=513 Hierarchy Shoulder Pads type 'Termos'

And straight from the studio...

Is it just me or do we envision a DC versus Marvel themed armies soon, these look rather splendid not sure what I would use them for exactly but they look fun never the less

I wish they'd at least let Thor wear his helmet once in a while in the movies!

They've covered several of his "costumes"...and the helmet was worn once ( and was the awful one from when he became a dictator)....

 lone dirty dog wrote:
Is it just me or do we envision a DC versus Marvel themed armies soon, these look rather splendid not sure what I would use them for exactly but they look fun never the less

They'd be great for a Space Wolf 'honour guard' type unit, I'm thinking something like a SW version of Sanguinary Guard with lots of gold, Thunder Hammers and Jump Packs, with those heads.

Expensive as hell, probably totally ineffective, but would look fething awesome!

 Paradigm wrote:

 lone dirty dog wrote:
Is it just me or do we envision a DC versus Marvel themed armies soon, these look rather splendid not sure what I would use them for exactly but they look fun never the less

They'd be great for a Space Wolf 'honour guard' type unit, I'm thinking something like a SW version of Sanguinary Guard with lots of gold, Thunder Hammers and Jump Packs, with those heads.

Expensive as hell, probably totally ineffective, but would look fething awesome!

That would be cool, and I always go with the 'Rule of Cool'.

Is there any painter to displays many of Puppets' models painted? It's hard to tell what the finished product looks like when just looking at the resin with no paintjob.

 Wyzilla wrote:
Is there any painter to displays many of Puppets' models painted? It's hard to tell what the finished product looks like when just looking at the resin with no paintjob.

I took a couple pictures for size comparison purposes, at least of those couple models that I have painted.

Cyber Arthropods with the space marine who was the first model I ever painted.


The giant beetle with a necron warrior. I should have taken the image at a better angle...


Cyber Reaper with necron warrior and space marine. The reaper's about the same height as a deathmark. Also, the necron warrior is on one of the round "age of hate" bases that Puppetswar sells. I really love their 25mm round bases.


One of their termos pads. Not the best fit in the universe, but they're not designed for other companies' models anyway.

Did You know that we have 'Barbarian' armours in our offer?
(Set of ten armours and 20 fitting arms).
http://puppetswar.com/product.php?id_product=210

Salabasama wrote:

 Wyzilla wrote:
Is there any painter to displays many of Puppets' models painted? It's hard to tell what the finished product looks like when just looking at the resin with no paintjob.

I took a couple pictures for size comparison purposes, at least of those couple models that I have painted.

Spoiler:

Cyber Arthropods with the space marine who was the first model I ever painted.

Spoiler:

The giant beetle with a necron warrior. I should have taken the image at a better angle...

Spoiler:

Cyber Reaper with necron warrior and space marine. The reaper's about the same height as a deathmark. Also, the necron warrior is on one of the round "age of hate" bases that Puppetswar sells. I really love their 25mm round bases.

Spoiler:

One of their termos pads. Not the best fit in the universe, but they're not designed for other companies' models anyway.

Thanks man, although I'm really curious about how Puppet's power armor looks, I'll definitely be wanting some of those units if I ever start a Necron army.

 Wyzilla wrote:

Thanks man, although I'm really curious about how Puppet's power armor looks, I'll definitely be wanting some of those units if I ever start a Necron army.

I've not purchased any of their power armors as of yet. I know that in searching, I've seen a couple images of the various sizes painted well.

PuppetsWar wrote:
Did You know that we have 'Barbarian' armours in our offer?

Yes! And they're totally the top of my list when I feel like making some GrimDark Randomness ... next year

- Salvage

First... First assembly of Valhalla Champions. We are curious which helmets you prefer for this unit, with faces shown or full covered like guy on the left?



And now, two new releases:

Time to turn up the heat!
http://puppetswar.com/product.php?id_product=514



And...what do you say about today's release - Elite force heads:
http://puppetswar.com/product.php?id_product=515

I say "SOLD", even though they look a bit huge on the guy on the right. Still, I need the grinning head with a flamethrower. or a grenade launcher. Or both.

Hello!
DRUMS!
Our FB joke contest winner is... Andrew Meermed
We simply didn't have another choice with so many likes next to his comment.
We would like to thank all of You for participating in our little contest. Andrew, please contact us with Your prefered weapons options for Your walker.
Congratulations!

That's really wicked! The gap between the shoulderpads and body is a little off-putting but otherwise.. man Andrew is truly lucky! Congrats

Congrats to Andrew! I am super jealous.

I think he got in there with his joke on the first day, that's why he had so many likes... of course it was a good joke as well

What was the joke?

^good question! not everyone is 24/7 on FB...not me especially...

just had alook on facebook and apparently it was this!

Andrew Meermed: Three words: Age Of Sigmar

https://www.facebook.com/159776737387320/photos/a.192205597477767.49794.159776737387320/1024214510943534/?type=3

Ouch, burn!

hmmm...werrrrlll....there were a lot of others waaaay funnier...but that might be due to the fact that i don´t get that joke...

 Viktor von Domm wrote:
hmmm...werrrrlll....there were a lot of others waaaay funnier...but that might be due to the fact that i don´t get that joke...

S'okay, it wasn't a funny joke contest. If you base it on likes its just a popularity contest.


Big mech looks sweet!

I thought Findlay Craig got more likes with his Scotsman joke? That's the one that I voted for and it has 34 likes verus 29 on the Age of Sigmar comment. The winner was supposed to be the comment with the most "Likes", so did that swing in the last day or did you guys just miss that or something?

I am not sold on that particular head for the mech, so I hope there are options! Especially a more tech-looking one.

Puppets War: Really Nice Models, Slowed-As-Feth Contests

@ RiTides - from the contest's rules: "We will hand pick a winner from the comments with most likes."

10% discount!
We would like to remind that large part of our catalogue is available now with 10% discount. From recently released High Crusade Force (http://puppetswar.com/product.php?id_product=480) to Light Biker (http://puppetswar.com/product.php?id_product=93) and (Demonic Assassin). More then 50 sets in total are cheaper now.
Photo shows Zombie Korps. (10% cheaper too).
You can find all cheaper models here:
http://puppetswar.com/category.php?id_category=154

Ah, got it (didn't realize it was just to determine the finalists, makes sense!).

Ahd oh my gosh, I know they're not new but those zombies are amazing!

Yep, our zombies are... great

Ok, ok, more modesty from now.

New release - Mercenary Heads. Which face is your favourite? Personally, I like two (that's not cheating, right?) - the shouting one and this one with a slightly mechanical, insectoid look.
http://puppetswar.com/product.php?id_product=516

Love that guy on the bottom left. Looks like royalty. A Duke maybe?

Man those heads are awesome!!!!!

That's really wicked! The gap between the shoulderpads and body is a little off-putting but otherwise.. man Andrew is truly lucky! Congrats

I think it looks better with shoulder weapons mounted there, because then the empty space is filled.

PuppetsWar wrote:
Yep, our zombies are... great

Ok, ok, more modesty from now.

New release - Mercenary Heads. Which face is your favourite? Personally, I like two (that's not cheating, right?) - the shouting one and this one with a slightly mechanical, insectoid look.
http://puppetswar.com/product.php?id_product=516

So good!
I like them all but for different reasons. Upper left and Upper right are just begging to be goons for Batman to beat up. Upper mid is either Riddick waiting to happen or a cyborg hacker for a GiTS type story. Bottom right has my Killzone army written all over it or any of the previous things I mentioned honestly. Bottom left, spitting image of the SNES Shadowrun game's main character.

EDIT:
Aegis - You're right. The weapon systems being in place definitely makes a difference! The lines of the cockpit style head piece are less drastic too I think, making it seem like a smoother transition.

I really dig that star lord head lol

Oh man, I see it now.. And the one bald head in that suit of armor looks like Mr Freeze. All you need is a clear dome to put over the top. Who sells those (I know I've seen them). Wow, PW lol, I like these even more than I did originally.

Bombshell miniatures does them,

or canabalise manitc mars attack minis

Gyys, we are glad You are so... imaginative with our latest release

And TOMORROW!
TOMORROW is the day
If You have any additional name proposals for this upcoming battle walker - it is high time to do this

I'm sticking with mr snuggles

 Lockark wrote:
I really dig that star lord head lol

How about that Riddick one?

Do i read that correct?
http://puppetswar.com/product.php?id_product=525
http://puppetswar.com/product.php?id_product=526
http://puppetswar.com/product.php?id_product=527

39 euros?

A certain company will not be amused!

http://puppetswar.com/product.php?id_product=518
Is that for the walker too? I would guess yes but I don't recall seeing it mentioned.
Nevermind.. the "Prime" thing gives it away.. figured it out

And yeah.. the price is perfect.. It fits right inside my budget, unlike another company's large walker
Now I just have to clear up that budget so I can get me one (or three) of these..

EDIT: Also.. these are 5.9" which.. yanno.. if you're looking for something grim and dark, this would stand in nicely. Just sayin..

 Jehan-reznor wrote:

A certain company will not be amused!

As if they will care :p

But it's a really, really good deal

£30 for a beast that size in resin is more than reasonable! Hell, you could kit it out with all the custom weapons you like and still come in cheaper than the competition!

 Paradigm wrote:
£30 for a beast that size in resin is more than reasonable! Hell, you could kit it out with all the custom weapons you like and still come in cheaper than the competition!

Indeed. I may have just found my Counts-as IK for my DA's - The Colossus-Pattern Dreadnought

Well dang, the walker with canopy looks great!



Weapons are pricey though, could you offer a pack of them? Right now you have to buy each individually:

http://puppetswar.com/category.php?id_category=269

It seems like the shoulder weapons are from their existing range. Could anyone point me to where they offer the smaller weapon types shown on the shoulders here?




There's also a better pic at the top of the current page of this thread. It seems like one set off weapons is being used to point up and one forward, and that there are options for each, but I don't know how I'd figure out what goes where.

The one with the two AA guns is bonkers!

 RiTides wrote:
It seems like the shoulder weapons are from their existing range. Could anyone point me to where they offer the smaller weapon types shown on the shoulders here?

The shoulder mounted weapons are setup for 3x1mm magnet holes. There are 3 mounting points on each shoulder (1 back, 1 side and 1 top). They should be able to utilize any of the Vehicle Weapons that have 3x1mm magnet holes for as well like the Nuclear Heater or Flame Cannon or Missile Launcher or AT Cannons.

Although you could probably use those weapons for the hand mounted weapons as well, the hand mounted weapons was setup with a 5x2mm magnet type hole. It would utilize any of the Epic weapons like Epic Prime Claw Left/Right, Epic Prime Blade, Epic Laser Cannon, Epic Flame Cannon, etc. All the weapons are found in the Mankind Vehicle Weapon section. A fully decked out Battlewalker with 4 shoulder mounted weapons, 2 hand mounted weapons runs about 75€ ($82.74)

RoninXiC wrote:
The one with the two AA guns is bonkers!

Reminds me of FF7's Proud Clod

 Dark Severance wrote:
The shoulder mounted weapons are setup for 3x1mm magnet holes. There are 3 mounting points on each shoulder (1 back, 1 side and 1 top). They should be able to utilize any of the Vehicle Weapons that have 3x1mm magnet holes for as well like the Nuclear Heater or Flame Cannon or Missile Launcher or AT Cannons.

That's just what I was looking for, thank you very much!

The only issue is they each come with 6 guns in a pack for 12 euros. If I'm looking to outfit one Prime walker with weapons, I'll have a bunch leftover.

What would be awesome would be a variety pack with 2 of each of these weapons for the top mounts... is there any chance of that Puppets War?? I'd place an order right now if there were (and would add a few arm weapons separately to my order, of course, since those are offered as singles)

Obvious solution is to buy 2 or 3 of these walkers

I do need to see which of the guns I already have though.. pretty sure I got a few when I bought an Enforcer.

 RiTides wrote:
The only issue is they each come with 6 guns in a pack for 12 euros. If I'm looking to outfit one Prime walker with weapons, I'll have a bunch leftover.

Use the extra guns to create home-made turrets or for something else. They are also compatible with all their vehicles and turrets, so if you plan to ever get the APC or other vehicles they are still a good deal. The weapons are also sold in pairs 5€, the only reason I included links to the 6 quantity is because in my opinion it is the better bang for the buck. You can also by weapon cores for 7€, then by 6x weapon tips (just the tip ^_^) for 7€ which then lets you swap out the weapon pieces for a bit cheaper than by some of everything since all the pieces are designed to be magnetized.

AT Cannon Pair - 5€
Nuclear Weapons Pair - 5€

Ordered one with magnets (said like Rick James). Only ordered the hand mounted AT cannon for now. I'll be placing another order for more stuffs later on.


Automatically Appended Next Post:
Any chance we'll be seeing a Nightmare version?

Also.. crap.. you have released the mercenary heads.. was going to order those too.. I guess my next order will be coming sooner than I planned

MLaw, did you order your magnets direct from Puppets War, too?

Thanks for all the help and links, Dark Severance! I'm only after one Prime so will probably order the weapon pairs

 RiTides wrote:
MLaw, did you order your magnets direct from Puppets War, too?

Thanks for all the help and links, Dark Severance! I'm only after one Prime so will probably order the weapon pairs

Yeah, I know I can probably get them cheaper on e-bay or whatever but I wanted to make sure I got the ones PW intends so there's no issues on fitting.

 RiTides wrote:
MLaw, did you order your magnets direct from Puppets War, too?

Thanks for all the help and links, Dark Severance! I'm only after one Prime so will probably order the weapon pairs

I ordered my magnets from Puppets War. The only reason was because 2 of them are standard sizes, one of them since they measure them in mm isn't exactly standard that I can get from my normal place I order magnets which is K&J Magnetics.

You mean you don't want to build a MechBay for the Prime to sit in, with a weapon rack on the side, weapon crates, armed with defense turrets? I mean who wouldn't want that... lol ^_^ There are always uses for extra weapons but I do understand, it was hard thing for me to determine. I haven't' figured if I want one or two and if I'm getting two then I would get the multiple weapons, but if I'm getting one then pairs... but I don't want to buy one and then determine I'll want another later. LOL!

Guys... I couldn't post anything yesterday and it seems it is not necessary
Yes, Battlewalkers are already available, You know that.

There are more things coming obviously too... Stay tuned and thanks for detailed links
I hope You all like our little walker.

PuppetsWar wrote:

I hope You all like our little walker.

Wait, what? "Little" walker? Does that imply there will be a big one eventually?

I think it's more like "say hello to my little friend" while pulling out a machine gun

If they go Warhound or bigger sized, I might have to get one, despite not really being interested in that scale of gaming

walker is awesome - any pics of a painted one yet?

 MLaw wrote:
If they go Warhound or bigger sized, I might have to get one, despite not really being interested in that scale of gaming

Heck, if it was half the size, the canopy version would be a great proxy for this.

It is pretty impressive.