Ahhhh, I see what you're showing off and getting at now!

Did you hear about the blonde who walked into a bar and asked for a double entendre and he a gave her a big one!

Zing!

I see where you got name now.

zinge you are such a tease!!! those bitz look sweetness incarnate! if i am right we are in for a real treat...er... tread^^

I don't know what you mean?

Ooh, I'm guessing if a larger cog were to be used everything locks together nicely right?

i bet he is enjoying himself immensly...well i´d be damend... i like it too^^

Bah Bah bader bah

AHA! are they still flexible when put together? looks almost that way as if they could be used for roling....hmmm...

Lets put it all together!

Ahhh, I really see it now.

i guess i have to comment just to provoke zinge into another picupdate...^^

I'm intrigued.

It's a tank track assembly right?

Is this really annoying or good fun?

Should I have eeked it out longer or posted all pics in one go?

Well, the suspense could kill off a few potential customers..

Ta Daaaaa!

I think Viktor died from the pressure of it all, but nice!

the rumors of my alleged death due to suspense are greazly exagerated^^ no suspense is cool! also the treads look terrific! and we do need some cool and entertaining marketing once in a while!

zinge, did you have much cleanupwork with that many parts?

and what lenght is this treadassembly? we need data!!! crave it^^

I want that.

And I second Vik. Give us data!

Very cool. I will be placing an order as soon as my wallet stops being empty those mini-revolvers are just way too cool to resist.

Ola,

Attached are some pics of some freshly moulded bits.

I tried to preserve the vents, gates and flash.

The largest wheel is 32mm and smallest 11.5mm

There are 29 links in the assembly shown.

A set would consist of 2 large wheels, 2 medium wheels. 2 bogies and 80 links.

Bits will also be available seperately and later as sets of X number of wheels etc

Anymore info please just yell!

Cheese

Keet

would 80 links be enough to say make a Leman russ be rollin`? seems that the set is enough for one complete tank...am i right?

Alrighty dudes I'll see you in a week

@Vik 40 links per side should make 2 track units about 135mm front to back.

Cheers

Amigos!

have a good trip!

thanks for the info!

Great...now i have no excuse why not to make a half-track chimera

That's where the bigger tire wheels would be nice ;-)

Damn, zinge, those tracks look great. Awesome idea! I see a lot of Orky potential right there

My Mek's brain can think of a number of uses for these proppa bitz!!!

zinge wrote:Ta Daaaaa!

Damm my computer was down (decorating) and I was waiting for this for so dam long and I did not get a chance to pretend that I did not know what the hell it was even though I did Dam Zinge that has come out well better than I had imagined I cant wait to get some of these for some green little ones tanks ……. that has come out looking FANTASTIC! I will be getting these for sure. Hope you have a good time in Scotland but not to good you don't come back I also left some reviews on the bits I got as well do I get some brownie points for that, great work just keep it coming. Maybe some alternative tracks for the treads a bit more orky would be nice but just an idea

I'm most curious about how they're going to be sold. I'd like to get two of the smaller drive wheels instead of a big one to make a big Ork trak, a bit like the Forgeworld one.

Details?

Zinge they look great, would buy so many right now if i wasnttaking a break from my AdMech atm, any idea on the price?

An idea for you. Perhaps rather than having your vinyl stickers available in custom patterns only, you could have a few standards. Things like sergeant and officer rank for IG, arrows for troops, skulls with wreaths for HQ, chaos symbols for heretics. Things that don't infringe on IP but are commonly used. Just something to be considered.

Hi Guys,

Awesome Trip Canoeing, camping, rachmaniov, chainsaws and more food than you can shake a felled tree at!

Back with loads of orders to fil and new moulds to make.

@ Fox Box - good to meet you Ben - will be selling the whole lot as a kit - price to follow and also each bit individually.

@noneoftheabove0 - Thats probably what I need to do - good idea.

Cheers

Kit

noneoftheabove0 wrote:An idea for you. Perhaps rather than having your vinyl stickers available in custom patterns only, you could have a few standards. Things like sergeant and officer rank for IG, arrows for troops, skulls with wreaths for HQ, chaos symbols for heretics. Things that don't infringe on IP but are commonly used. Just something to be considered.

This is a good idea great for IG troops with general use icons ( like you said no IP issues ) the raised look for a more detailed look on miniatures would bring a new depth, I would buy these then.

I'm waiting for Defiance Game's USMC models to drop so I can start an IG army. If you haven't made some sergeant rank by then, expect an order from me. I've been trying to free hand simple symbols on my Space Wolves because I hate the transfers so much, but my free hand work looks somewhat worse. I could only imagine trying to draw out three chevrons, three rockers with a diamond in the middle. *shudder*

Ok then lets start a wish list for a generic IG or other Scifi trooper insignia.

It cant be too detailed as the cutter cant handle really fine organic detail.

Sergeant stripes should'nt be a problem.

Also need an idea of size of the bits (where would you put it?)

Cheers

Kit

definatly either should pads or if that would be possible on the sleeves...o the chest i think it would be far too tine as the IG chest could be then decorated easier with a slab of GS ...

as for what signs... private
sarge

and some officer markings...all done in the ^ fashion i think...

For something that would fit most armies, a single chevron for a private, three chevrons for a sergeant, some railroad tracks for a captain, maybe a star for generals and higher commanders, probably the standard one through ten in roman numerals to indicate squads. Oh, if you make an arabic numeral set in a scale small enough that two or three of them would fit on a Cadian shoulder pad, it would probably be a huge bonus for most. Like I said, I'll be working with different models, so it may not work for me, but if you base the squad numbers off Cadian shoulder pads, you can't go wrong. The rank would probably be best on a Cadian sleeve, chest, or shoulderpad.

Pretty much covered all the aspects rank insignias, roman numerals, skulls basic shape like the transfers you can get numbers would not go a miss either, medical insignia (may be a couple of designs ) flame insignia that kind of thing all to fit shoulder pad of IG

Something else that just came to me. In WWII, the 101st Airborne Division used the playing card suits and some basic geometric shapes as quick identifiers. Something like that may be in order.

noneoftheabove0 wrote:Something else that just came to me. In WWII, the 101st Airborne Division used the playing card suits and some basic geometric shapes as quick identifiers. Something like that may be in order.

Yes like the card idea that would look pretty neat

All right looks like we have the makings of a nice set of markings - will start some scribbles.

Finally sorted a price for the tank tracks.

For a pair of tracks (Twice what is pictured below) the cost will be £19 (which automatically includes free postage worldwide at the moment)

I am now in urgent need of some good photos of these tracks both painted and not.

If anybody feels they could provide this service for this product I will atleast refund the cost of the product (exceptional quality may require further recompense). If you are intrested in this deal please pm me and we can talk specifics.

Those tracks do look nice but I have to say £19.00 that is quite expensive for a set of tracks don't get me wrong I can understand that there is your out lay production costs and all, however I think that would be a stretch of funds I was hoping they were going to be less than that. Have you got a picture for size comparison say with a miniature so we can have an idea of scale maybe that would help.

It was good to meet you too, Kit. There was one thing I forgot to ask about though - I now have the artwork for transfers but lack a printer that can manage a good enough resolution for them. I don't suppose you have access to one by any chance?

When do you plan to start selling the tracks?

@ Bangbangboom - I hope to have stock and parts uploaded at the weekend. Stay tuned.

@ Lone Dirty Dog - please bear in mind This is a 98 piece kit.

Cheers

Model


Automatically Appended Next Post:
My tesla coil mould broke so I took the oppurtunity to rework the greens. Now only slightly different but much better casts and easier to clean up.



http://www.freewebstore.org/Zinge-Industries/1_Resin_Tesla_Coil/p658641_3674617.aspx

Cheers

Kit

Zinge, keep an eye out for my upcoming order this weekend! I am going to be needing a bunch of those tesla coil sprues and some tnak treads. Have you ever thought about making more gothic architectural greeblies? I am thinking besides the obvious statues and such, I think there would be a market for the triangular pointy bits that adorn the GW CoD kits.

@ Dsteingass

Not exactly sure what you are after but if you want to send me some scribbles/images I will certainly have a look.

Cheers

Firts Aid

Dont get me wrong I do understand that there is a lot of work involved and pieces I just thought the price was a bit on the high side but I do think it is a nice kit and I am sure it will sell just for me it was on the costly side.

I do think if you can give a size comparison picture it might help to see if it will be worth the investment of what I was hoping to use it for.

I do love your work and have been happy with what I have had but I will always be honest with what I think but do not wish to offend.

@ Zinge

I don't know what the architectural term for these are, I just call them pointy bitz

I had an idea for you. It seems your ammo belts are pretty flexible, so how about vines?

Doing some thin vines like Ivy or some kudzu/creepers would be great for doing more senic bases. I have yet to find something that looks very good and making them myself is very intensive.

Ooh good idea! or even flexible tree armatures?

You can get tree armatures already from Woodland Senics

http://woodlandscenics.woodlandscenics.com/show/category/TreeArmatures

Yes I know, but the only thing that sticks to the unholy plastic they use is hot glue! Resin would hold better I think.

Some vines of some description could be rather handy, although I'm curious whether it'd be a good idea to do some as vinyl decals as well to provide a bit more depth to things.

Yeah, the vinyl decals might work ok for making things like cammo netting or up the sides of buildings.

I don't think the decals would be 3D enough to add to bases or things like that though.

I had an interesting chat with a dakkaite about maybe suppling some of my bits in white metal. No idea on how it would effect cost but some people prefer metal.

Any input most welcome.

Cheers

Kit

could you not also offer a single peice track unit? Obviously you would lose the separate triangle peice in the middle, but you could sell a one peice track bit for a much lower price, and less clean up/assembly for the purchaser as well!-

AH

Hi Guys,

Tracks are up and they didn't want to go (had to rebuild computer - twice!)

http://www.freewebstore.org/Zinge-Industries/Modular_Tank_Track_Set/p658641_4755157.aspx

I have also redone the Grills and Vents - now available in a sprue for a small saving.

http://www.freewebstore.org/Zinge-Industries/Resin_Grills_26_Vents/p658641_3121589.aspx

@ AH - Not a bad idea - maybe able to keep the bogie in with a bit of tweaking.

Cheers

Kit

Like those tracks... very spiffy.

Any luck printing the image I sent you?

zinge wrote:All right looks like we have the makings of a nice set of markings - will start some scribbles.

Finally sorted a price for the tank tracks.

For a pair of tracks (Twice what is pictured below) the cost will be £19 (which automatically includes free postage worldwide at the moment)

I am now in urgent need of some good photos of these tracks both painted and not.

If anybody feels they could provide this service for this product I will atleast refund the cost of the product (exceptional quality may require further recompense). If you are intrested in this deal please pm me and we can talk specifics.

PM sent

Pic of tracks with some beautiful assistants - as requested!


Automatically Appended Next Post:
@ Foxybaby - its printed just about readable but as the lady said its essentially too small!

Would you mind posting a photo of the print out?

I figure one won't be able to make out all the detail but I'm wondering how bad it is.

Ja Whol Mein Herr!


Automatically Appended Next Post:
Don't forget that should be 10mm hi

don´t mind me... but either say : Jawoll...or jawohl...^^

Something I've always been curious about. Do people in Germany still use the word "Fuhrer" as the literal translation of the word "Leader"? Or does that word carry negative connotations?

@ Vik - thanks my German is rusty my written German worse and what I do speak is only usable on a boat or in a bar

if you would call that word out in public you certainly would get some really nasty loks either or even some apreciating looks... you choose what is scarier...for raising your hand you can get into some serious legal trouble by the way...and i am not even beginning on talking about swasticas at all... the whole issue of the second world war is some serious sore wound still... maybe after some young dumbheads and the old ones too have bitten the dust things may sooth....but i recon thats another fifty years at least....some things are way to deep running...

Viktor von Domm wrote:... maybe after some young dumbheads and the old ones too have bitten the dust things may sooth.....

This just summed up my whole view of politics!

Zinge- love what you have going here. i just recently found this thread, from either one of Vik's comments or steingass's, or both maybe! I didn't read every post, I'm at work after all, but I went to your store too. Love it! I'll be ordering lots of goodies soon! In particular, the ammo belts and feeds, and most likely some pistols...just have to sell a some stuff on ebay so my wife doesn't yell at me for spending too much on a "hobby".

Keep up the awesome!

spot on mate! on all acounts^^

oh wow, I had no idea Vik. Although I've heard that the swastika is a big no no. At least you remember your National scars, we just seem to forget or explain ours away, just to repeat them again and again.

well i am not sure if germany is not capable to repat theirs...some of the motions going on here are bad...and some politics are backing those up because of getting some odd votes... this is rather unsettling...becuase these guys think they can controll the peeps with certain ideas but instead they create a platfrom and possibly infect latent pees as well...but enough of this here... if you want a hearty chat of nonsense (literally) then come to my thread...

this is for lovley stuff of zinges^^ by the way do look at zinges handguns...i particular about the mauser like one!

aww crap , sorry for hijacking ZInge.

@RSJake - thanks very much

@everyone else I do enjoy these little tangents and chats this thread seems to spawn.

@Vik Whats your take on Germans being the bad guys again like in Captain America etc?

Cheers

Some assembly required

i think the germans still haven´t learned an essential lesson... and that i see a world that is coming to to think that rascists believe are to be covered in certain stupid ideas... some politics try to sooth them idiots by giving them small bitz of what they ask for and if you give them one finger they soon have them by their throats and we could then all be in a big war again... i know it sounds pretty dark and zomby nazi stuff here but sometimes when you see news about what has caused some fights in the streets or when you see nazis march on protests and see them get protection by the police for the sake of the democracy then you might catch the wrong ideas about the system i am living in... and you might even go so far as to stretch that cap america metaphor and think about a shadowy figure like red skull that is pulling some awful strings in the dark...you can´t really think for real that an ugly shrew like our chancellor is actually ruling this overpopulated country? i mean we are talking about the conservative germany here....

Well, IMO the greed just makes people poor, and when people are poor, crime rises, and soon people become uncivilized and grasp onto leaders and ideas. Generally because they are too afraid to think for themselves. It is easier to jump on a bandwagon, security in numbers.

Anvils hammer wrote:could you not also offer a single peice track unit? Obviously you would lose the separate triangle peice in the middle, but you could sell a one peice track bit for a much lower price, and less clean up/assembly for the purchaser as well!-

AH

I would prefer one piece as well...

dstein... you are totally right here and it is if portrayed like that a global problem and not that of a sole nation... power hungry will do everything to stay on top...

I think we all need to take a step back and look over our own histories to realise that many monstrosities have been committed by all nations some just newer than others some even to date, true we should not forget but we must try and learn from them and not allow them to be repeated. Never under estimate the power of a minority to corrupt the views of the majority as well as never tarnish all with the same brush take people for who they are and not what you perceive them to be. Well rant out of the way great stuff zinge lets bring the world together in a happy model making bliss mind you I have to say the Germans had way cooler looking stuff in the war than us and my Orks would not look half as good without that influence sorry but true ………...

My scout bikers - nearly finished are getting some winter tyres - hopefully wont trash the rest of the model - might as will practice what I preach!

Call me stupid but do you mean you are going to convert this bikes tires ? I was just wondering have you considered sculpting up some realistic looking bike tires ?. Its just I want to scratch build some bikes for my guard but there are no decent tires out their that would work some thinner more realistic ones would be good or a set of variety types like you would get for different kind of bikes. Its just the market does not really cater for this I would like to make some choppers for necromunda gangs and some for orks but there is nothing really out their maybe you could help out here.

@Mr Dog

I made these before I designed my offroad wheels - so I am going to hack the originals off and replace with my shiny ones



Cheers


Automatically Appended Next Post:
Oh yeah - Roy - Thanks for the order - should be going out today assuming all goes to plan!

@Mr Zinge

I see enough said

Zinge, how is the work on ammo-belt (compatible with Stormbolters) going?

While I love both the wheels and the tracks, I would really like o see some ammo-feeds.

@Steelmage99

Ammo feeds are on the site - I will sort pics of grey knights and termies with various feeds shortly.

http://www.freewebstore.org/Zinge-Industries/Flexible_Resin_Small_Ammo_Belts/p658641_2863675.aspx

http://www.freewebstore.org/Zinge-Industries/Flexible_Resin_Large_Ammo_Belts/p658641_2959916.aspx

Cheers

Kit

I have to agree. I converted these Hive Biker gangs several years ago (falling apart now from improper storage) but the tires are definately too big

So any input on diameters - widths and styles of tyres - not too bothered about PSI though

Exactly half as wide as these, same diameter. Not too much tread, as it wouldn't make any sense at all to put off-road tires on a street bike.

If I made thinner tyres would you need mud guards etc or cut down the existing?
Or would you want them intergral?

I think if you made thinner tires, you should make compatible mud guards. Or if they are for choppers, you don't really need mud guards I guess. But some might want the mud guards, so I say it's worth a shot.

I just want some alternative "realistic" looking tires did not really think about the diameter to be honest as I was thinking of scratch building rather than using on existing models. As people have all ready mentioned is the kind of thing but I was hoping for some to work with IG and some for orks Without metal plates riveted all over them more along the forge world ork bike upgrade set. I guess ork wise I was looking at chopper style wheels larger in size but thiner in width some large back wheels with some decent tread pattern maybe some to build trikes with as well, IG wise all terrain wheels and road bike wheels keeping to the scale of IG not space marine bloated scale.

I work best with pictures and other people seem to respond to them stick some up and see if anything takes my fancy.

@Mr Dog handed your parcel to the postie personally - should be with you tomorrow!

@Mr Zinge thank you very much will keep a look out for it

Will have a look for some pics did have some on my computer some where ……………….

Looking for the pics but found some stuff for idea's
the wheels dude the wheels its more the size of the wheels though you could drop the spoke look and put discs in that way they would tie more with the 40k look, This one I just thought was kind of cool Orky and this one is dam cool build the whole thing and I would buy loads

Who wants ogre bikes Hope this helps !!!!

I really need some shots of the first one at some different angles if I am to make an educated scientific suggestion.

dsteingass wrote:I really need some shots of the first one at some different angles if I am to make an educated scientific suggestion.

Me to but I cant find any all the others that dam woman gets in the way of the bike go figure …………..

WooHoo! Just ordered some guns, assault rifles, power cables and ammo belts! Can't wait to see them in person!

And I can't wait to see what your going to do with them?

Cheers

Parts

I am waiting on my new debit card, but then I will be placing an order.

Who wants a scenic diomrama or large oval flyier/Monster bas?

Sculpted by my Good Friend Liam Ainscough for his Dark Eldar Army who doomed to failure @ the GW tourny this weekend!

Well if you are given it away I will take it …………………………….

My order turned up today and everything was looking great the tracks have turned out really well I have to say, need to get them together to see how good they really look everything else looked dam good as well.

The extra's are always a nice touch so thanks very much will be back again soon to spend the cash I don't have.

I second the plea for tires/wheels for use with our toys. I would love to see something in at least two sizes. A standard size wheel and an over-sized one as well. As for images for inspiration please refer to this image search link. Most anything here would be good. Basically any deep tread designed for off road work would be good.

http://images.search.yahoo.com/search/images;_ylt=A0oG7mrayaJOLE8A1bBXNyoA?p=military%20tires&fr2=piv-web

or a google link

http://www.google.com/search?q=military+tires&hl=en&client=firefox-a&hs=A1c&rls=org.mozilla:en-USfficial&prmd=imvns&source=lnms&tbm=isch&ei=pMqiTsRbyevSAbvX1f4E&sa=X&oi=mode_link&ct=mode&cd=2&ved=0CF4Q_AUoAQ&biw=939&bih=610

First link top row six picture where do I sign up ………………… although I was after bike tires but I do agree we do need tires of all kinds ………………….. Zinge has a couple of tires in his store might be what you are after ?

Got some nicely painted bits in

Quick favour done by Pete Austin of Egg head miniatures - http://www.facebook.com/pages/Egg-Head-Miniatures/120841174605022

Cheers

Keet

The guns have painted up well and the paint job really helps bring out the detail shows how good they are (could be putting a list together for a few now) the blaster pistol is dead cool star wars anyone ………...

Looking forward to seeing painted AKs, assuming you're going to be getting them too, of course.

I love the blatant necro bulkhead ladder! I really need to place an order man.

Zinge@ A bit quite these days whats going on anything new ?


dsteingass@ Checked out your necromunda scenery NICE WORK! REALLY NICE! you have done some great stuff love the way you have used the card scenery pieces to build the sections from in plasti-card.

Dance Monkey Dance!

Short answer is lots but not much coming out imminetly. Doing a lot of commission work some of which may turn up on ZI at some point.

Looking at upgrading to a proper website address soon - getting all respectable and stuff!

Teaser for you if you can find it!

http://www.dakkadakka.com/dakkaforum/posts/list/30/401241.page

So you'll be selling the bases as well? Or just getting some of the profit..

Btw, think i just bought a warrior off ebay from you.. lol

Dance Monkey Dance

Dont want you getting complacent now do we It was more a case of anything new to spend my borrowed cash on (helping the euro debt and all that) plus I got loads of projects on the go just want to know if I need to add another one to the list …...

Ook!

I have loads of projects that slowly making their way to the surface they get poked ever closer to completetion every now and again as the mood strikes me.

zinge wrote:Ook!

I have loads of projects that slowly making their way to the surface they get poked ever closer to completetion every now and again as the mood strikes me.

Well here is a big poke Now Dance Monkey Dance

Just found these maybe you remember them like the bandolier you should redo them and

I got my order quite a while ago, but I was gone, so I didn't get to do anything with them for a while.
I got 10 of the small AK-47's:

Someone had menthioned either here, or in a review that the guns are a on the small side. Well, that is true, they are smaller in length than the IG las guns. But if you add a bit of plastic rod to the business end, and either a wire or wooden butt stock to the other end, like so:

You get a gun that is the same size as an IG weapon. As seen here: (GW mini shown for scale purposes only)


I am very happy with them, and will be converting all of them in a similar fashion. Some with wire stocks and some with a wooden or composite stock.

I got lots more stuff too, but I haven't gotten around to using them yet.

Thanks Zinge!

RSJake@ Nice job works well like the rod on the end gives it more of a lasgun effect

I rather like the stock. I'm wondering whether I should attempt something similar for my bikers.

Any new stuff in the works, Kit?

Short answer - yes




Long answer - Yup indeedy doo there are definitely things in the works. In the works I can confirm that there are things.

Knock Knock,

Whos there?

Things in the works!

Really?

Yes

Awesome!

LOL zinge.... good one mate! Needed a smile this morning.

i think he is secretly planning another of those cliffhanger teasers...^^

Well still hanging

Currently I have more irons in the fire than I care to count. I have nothing due out for a couple of weeks due to commitments personal and work.

Finishing a few personal projets scout bikers and a predator

Got super Dungeon explore which I am putting together and learning the rules for.

Helping GF with her masters projects - or at least keeping my head down.

Sponsoring the Wildwest Shoot out 2 In January.

Hey - you asked.

Oh and lots dancin'

keep well mate... seems like you have a big schedule^^

zinge wrote:Currently I have more irons in the fire than I care to count. I have nothing due out for a couple of weeks due to commitments personal and work.

Finishing a few personal projets scout bikers and a predator

Got super Dungeon explore which I am putting together and learning the rules for.

Helping GF with her masters projects - or at least keeping my head down.

Sponsoring the Wildwest Shoot out 2 In January.

Hey - you asked.

Oh and lots dancin'

Sorry I asked looks like you got a plateful well keep dancin

Reply by: zinge - click to view full reply 

10028

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/11/24 08:46:53

Post by: zinge

Yeah trouble is I have loads of ideas all clammering to get out.

Stay tuned!

Reply by: zinge - click to view full reply 

10028

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/11/30 20:29:05

Post by: zinge

Updates? You want updates?

Well I got a big one for you (ammo belt that is)

I give you the "Disdain" size Ammo belt 8mm x 4mm x 150mm

Cheers

Kit

2

Reply by: Viktor von Domm - click to view full reply 

24297

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/11/30 21:30:54

Post by: Viktor von Domm

look at the size of that thing...

is that titan scale?

Reply by: Lysenis - click to view full reply 

25081

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/11/30 22:05:54

Post by: Lysenis

That looks like a warhound at best and its more likely for a baneblade.

Reply by: Viktor von Domm - click to view full reply 

24297

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/11/30 22:08:08

Post by: Viktor von Domm

ok... if you say so... never had either in my hands so scale is not something i am experienced with...

Reply by: Steelmage99 - click to view full reply 

2304

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/11/30 22:14:40

Post by: Steelmage99

There is a picture I have been waiting for!

What size is the one used on the marine.....And can I get a gazillion, please?

Reply by: lone dirty dog - click to view full reply 

28415

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/11/30 22:45:09

Post by: lone dirty dog

Holy c@£p that is a huge one impressive

Reply by: zinge - click to view full reply 

10028

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/11/30 23:27:07

Post by: zinge

@Steelmage99

Its SA3

Please step this way: http://www.freewebstore.org/Zinge-Industries/Flexible_Resin_Small_Ammo_Belts/p658641_2863675.aspx

The belt is for my contemptor Dreadnought coming to a plog near you soon!

(Doh Note to self it helps if you read people posts)

Also OOK OOK - pirouette!


Automatically Appended Next Post:
Large Belt now available

http://www.freewebstore.org/Zinge-Industries/Extra_Large_Flexible_Resin_Ammo_Belt/p658641_5131740.aspx

Cheers

Kit

Reply by: Lysenis - click to view full reply 

25081

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/11/30 23:58:41

Post by: Lysenis

Hmmm will have to see how it fits on a contemptor. . . It shoul work but it might look a bit odd. . . MHO since a contemptor's ammo compartment is in the hand. . .

Reply by: zinge - click to view full reply 

10028

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/12/01 00:00:13

Post by: zinge

Oh ye of little faith gimme a couple of days!

Reply by: Lysenis - click to view full reply 

25081

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/12/01 00:07:07

Post by: Lysenis

Oh i have a TON of faith. AND if you can pull this off you will most likely become even more famous.

Thanks to forgeworlds Contemptors, anything peple make for them that are good quality and usefull become hot comodities.

Reply by: Commander Cain - click to view full reply 

26800

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/12/01 02:44:50

Post by: Commander Cain

Hmm, interested! Especially since I just bought a contemptor!

Reply by: Gavin Thorne - click to view full reply 

6806

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/12/01 20:15:31

Post by: Gavin Thorne

Hey Zinge, I sent you a PM about 2 weeks ago and was hoping for a reply... I know you're busy-busy, but is there any chance of getting around to that?

Reply by: zinge - click to view full reply 

10028

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/12/02 00:34:08

Post by: zinge

Very sorry fella thought i did -

Note to everyone I usually respond in a day or two. So feel free to poke if you get nothng (especially if I am active on the forum)

Ah Ah Waltz

Reply by: cuda1179 - click to view full reply 

196

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/12/04 01:22:37

Post by: cuda1179

I know I am going to sounds greedy for even asking, but is there any chance that you will be making an ammo belt big enough to fit battlecannon sized ammo?

Reply by: zinge - click to view full reply 

10028

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/12/04 02:26:28

Post by: zinge

@Cuda1179 - Hi there's a guy that looks just like you over on Warseer and he was after a similar thing - small world

See below - not yet released due to moulding issues.

Also updates:

New 28mm Off road wheel

And a New Fan

Greg the Grey knight only shown for scale.

2

Reply by: lone dirty dog - click to view full reply 

28415

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/12/04 12:12:27

Post by: lone dirty dog

Zinge@

Glad to see the new stuff that fan is spot on (nice to see you listen) will be getting some of those and the new wheel is that larger than the last lot

Reply by: zinge - click to view full reply 

10028

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/12/04 12:17:38

Post by: zinge

@ Mr Dog,

New wheels are 28mm, last wheels were 19mm

Also I said updates Plural!

4

Reply by: lone dirty dog - click to view full reply 

28415

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/12/04 13:03:31

Post by: lone dirty dog

Zinge@

Mr Ambassador with these Zinge accessories you are really spoiling us . I can find a use for all of these they friggin awesome love these no wonder you have been so quite as of late give me give me

Reply by: Anvils Hammer - click to view full reply 

1975

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/12/04 19:56:22

Post by: Anvils Hammer

That fan is awesome!

Makes me want to bring my Gun Ship project forward by six months!

:p

AH

Reply by: Tzarkahn - click to view full reply 

49973

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/12/05 09:58:20

Post by: Tzarkahn

Emailed Kit Yesterday and asked about stock, and he got back to me in under an hour, On a Sunday!

The stock levels were updated for the store, so if you wanted anything, buy away!

I think I bought all the little Grills and Fans though , well most of them.

Reply by: lone dirty dog - click to view full reply 

28415

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/12/05 10:45:27

Post by: lone dirty dog

Cant see no new stuff in the store ?

Reply by: zinge - click to view full reply 

10028

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/12/06 23:40:10

Post by: zinge

Large ammo belts are back on the menu!

Reply by: dsteingass - click to view full reply 

48594

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/12/07 00:34:05

Post by: dsteingass

Can i get that covered in Gravy?

Reply by: zinge - click to view full reply 

10028

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/12/11 20:50:03

Post by: zinge

This just in:

aaaaaaaaaaaaaaaaaaaaaaaaaaaaahhhhhhhhhhhhhhhhhh

Stop ordering things!

(not really)

In other news:

Power cables:

bike chain,
large ribbed
small ribbed
balls
chain

Any body going to the wild west shoot out (in USA somewhere)?

1

Reply by: lone dirty dog - click to view full reply 

28415

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/12/12 08:55:56

Post by: lone dirty dog

brilliant just brilliant I can finally start to scratch build the bikes and gang to go with them

Reply by: zinge - click to view full reply 

10028

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/12/15 00:54:17

Post by: zinge

Ola - I have started a plog so you can see what I am playing with also make notes on how to use my bits..

http://www.dakkadakka.com/dakkaforum/posts/list/417247.page

See you there!

Reply by: zinge - click to view full reply 

10028

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/12/16 12:25:15

Post by: zinge

Hi Guys and Gals!

Any intrest in an extreme form of blu tack? I have found a putty that is stronger and stickier.

Great for trial posing models. I found blu tack stuck better to me than the model. (also reusable)

Let me me know if I should stock it?

Cheers

Kit

Reply by: Anvils Hammer - click to view full reply 

1975

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/12/16 12:53:09

Post by: Anvils Hammer

A thousand times yes!! I will buy some!

Blue tack is such a pain as I assemble 2/3s the mini, then go to blue tac on the last bit and somthing else falls off.. repeat infinatly till I go insane..

AH

Reply by: zinge - click to view full reply 

10028

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/12/16 15:51:39

Post by: zinge

Calm down dear!

How about a really crap hair dryer?

Not for drying your hair (coz its crap) but for drying paint and weathering powders. Its small compact and wont melt your models or too powerful that it blows the paints and washes around.

Reply by: lone dirty dog - click to view full reply 

28415

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/12/17 20:12:28

Post by: lone dirty dog

Love the fact you look to cater all needs of the hobby LOL but does the misses know you are trying to sell her travelling hair dryer

When will the chains and new fans be in stock got an order building here and it keeps getting bigger

Reply by: zinge - click to view full reply 

10028

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/12/18 16:25:30

Post by: zinge

Ola!

Next preview,

Got some 28mm & 19mm military wheels

Also an insert for the 19mm wheel (will fit this wheel and the offroad wheel)

Will update site soon with new bits.

Cheers

Flat Pack

2

Reply by: lone dirty dog - click to view full reply 

28415

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/12/18 17:05:57

Post by: lone dirty dog

NICE!

My order is growing once again

Reply by: zinge - click to view full reply 

10028

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/12/18 18:39:02

Post by: zinge

Website Updated with:

Wheels,

Fans

and New Power cables

Cheers

Kit

Reply by: Lysenis - click to view full reply 

25081

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/12/18 18:48:36

Post by: Lysenis

Yay new stuffs! I still need to put in my order for my naginata's so my SM's have a smexy power sword. . .

Reply by: MajorTom11 - click to view full reply 

22687

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/12/18 18:56:54

Post by: MajorTom11

Your cart is extremely glitchy... it won't let me add some items, it is sporadically erasing some items...

:(

Reply by: zinge - click to view full reply 

10028

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/12/18 19:00:16

Post by: zinge

Yes I know its a real PITA and I am in the process of sorting it out But that won't happen til after Christmas.

Cheers

Kit

Reply by: MajorTom11 - click to view full reply 

22687

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/12/18 19:04:38

Post by: MajorTom11

But I needs mah Ahmo Belts!

lol, I will wait, I have heard good things about your stuff, so let us know when it is working 100%... I can get everything in the cart except ammo drums for 28mm -

Reply by: zinge - click to view full reply 

10028

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/12/18 19:10:30

Post by: zinge

That's because they are out of stock.

Some Genius on B&C put some on his sternguard

http://www.bolterandchainsword.com/index.php?showtopic=241668&st=50

And now everyone wants them - Casting as fast as I can. Got resin on the kitchen table - Introuble with the missus.

Waaahhh!


Automatically Appended Next Post:
Should be back in stock in a day or 2

Reply by: lone dirty dog - click to view full reply 

28415

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/12/18 19:59:20

Post by: lone dirty dog

Order placed cant wait for it to get here even if it is short of a few things thanks to the Genius on B&C and few miss listings yes you know what I am talking about but great stuff and some novel uses coming

Reply by: illuknisaa - click to view full reply 

11783

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/12/22 00:07:13

Post by: illuknisaa

I would like to see tank track wheels bigger than your current wheel size. Also various versions (like 8 or so)

Bare ork heads. Everybody is making nazi, command pirate and mexicano ork heads but nobody has bare ork heads (no helmet, no hair)

Bare ork torsos. I saw one set but that was really poor quality. Also open jacket (like that biker ork torso) torso would be cool.

Skulls, you can never have enough skulls. And I'm not talking about a set of 5 skulls more like something you start measuring in weight isntead of amount.

Reply by: Ian Sturrock - click to view full reply 

13192

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/12/22 00:15:12

Post by: Ian Sturrock

I'd like to see some firing slits -- a bit like the armoured vision slits on rhinos, but a little bigger, for putting on fortifications or counts-as-Chimeras. I started converting some cardboard packaging into a bunker using one of your doors, and now I need firing slits too...

Reply by: zinge - click to view full reply 

10028

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/12/22 00:17:32

Post by: zinge

Pictures speak a thousand words my friends

Reply by: illuknisaa - click to view full reply 

11783

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/12/22 00:59:40

Post by: illuknisaa

These:
http://us.123rf.com/400wm/400/400/AlexMax/AlexMax0608/AlexMax060800015/492484-heavy-tank-track-close-up-of-wheels.jpg

not these (although I don't mind more these)
http://web2.cyol.com/expo/xml/star/35000/34498/img/wave/2010/03/img_1268017410_7.jpg

Reply by: Ian Sturrock - click to view full reply 

13192

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/12/22 01:48:40

Post by: Ian Sturrock

Here's a firing slit, though they're often a lot simpler than this:

http://commons.wikimedia.org/wiki/File:Salpa_line_bunker_326_machine_gun_firing_slit.jpg

What I'd want, ideally, is something like the standard dreadnaught vision slit -- so a rectangular slit, with a rectangular frame, with rivets -- in a variety of sizes.

I might just make my own simpler ones out of plasticard though...

Reply by: lone dirty dog - click to view full reply 

28415

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/12/22 08:48:33

Post by: lone dirty dog

Ork with hair ? Like this you mean :







feth chuck Noris

Reply by: Clang - click to view full reply 

550

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/12/22 20:33:36

Post by: Clang

Those tyres are great. If you're looking for ideas, I'd also like to see narrower tyres - they'd be particularly suitable for trailers and gun carriages, and of course civilian vehicles, including motorbikes. Fat tyres look great on ork artillery, but not so much for other races...

Reply by: zinge - click to view full reply 

10028

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/12/29 13:55:54

Post by: zinge

Huzzah - All orders filled!

To the post-office-mobile!

Dinner Dinner Dinner Dinner Zinge Man!

Reply by: lone dirty dog - click to view full reply 

28415

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/12/29 22:46:22

Post by: lone dirty dog

about time LOL

POW ZAP CLANG IT STUCK IN A ROYAL MAIL VAN ……….

Reply by: lone dirty dog - click to view full reply 

28415

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/12/30 11:38:15

Post by: lone dirty dog

My order turned up today all looks pretty good will try some bits out the wheels look great nice job on those and the small weapons are crisp they look even better here.

Thanks for the samples they will come in handy that black tac stuff is like a cross between blutack and a putty works well mind and yes it is better, although I thought for a minute you sent me an unwrapped black jack I thought the Christmas pressure had got to you.

I have to say the grey resin looks better than the old cream colour plus you can see the detail better overall very happy will be back soon for some more stuff

Reply by: zinge - click to view full reply 

10028

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/12/30 11:43:38

Post by: zinge

Great news!

Yes the new pistols have been tidied up and are slightly crisper - Awesome that you noticed.

Thats why most companies use grey - who would have thunk it?

The black tac needs working between fingers for a few minutes for full strength.Its ready when its hard to get off your fingers.

Let me know how you get on.

Cheers

First Aid

Reply by: lone dirty dog - click to view full reply 

28415

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/12/30 11:52:11

Post by: lone dirty dog

Will do and those wheels will look great on my ork bikes


Automatically Appended Next Post:
Almost forgot do you still produce those lights like the one you sent in clear resin if you do what sizes do they come in and if you have reference picture that would be great

Reply by: zinge - click to view full reply 

10028

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/12/30 12:02:09

Post by: zinge

I am having issues with clear resin - when its sorted I will release them properly

But to tease you there are 5 sizes:

Bulkhead 5, 10 & 15mm

Warning in 5 & 10mm

Cheers

Kit

1

Reply by: lone dirty dog - click to view full reply 

28415

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/12/30 12:50:01

Post by: lone dirty dog

I want some of those bulkhead lights for my grot ship they will fit in nicely I don't mind if they are in standard resin as i will be painting mine anyway but they look just right, have you considered doing longer versions of the bulkheads so the middle is stretched so you get more a rectangle shape with curved ends version.

Reply by: Gitsplitta - click to view full reply 

26790

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/12/30 13:13:33

Post by: Gitsplitta

Now that's cool... be looking forward to the release of those.

Reply by: zinge - click to view full reply 

10028

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/12/30 15:11:09

Post by: zinge

I am Man and I have Made FIRE!

Does dance

Will be part of the clear resin range once sorted.

Will probably make everything available in both normal resin for painters.

Cheers

Kyt

1

Reply by: PDH - click to view full reply 

32193

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/12/30 15:22:27

Post by: PDH

My order arrived safe and sound this morning. ...The guns are lovely (revolver is just perfect) and the 1mm wire wrapped cable should be on every 40k converters desk! Ladders and resin cables are going to be useful for Inq and Necro terrain. I now need to build a model on a 40mm base so I can use the fans...I knew I should have gone for a smaller size when I ordered

Wish I'd made that gun order back in April like I originally planned.

Thank

Reply by: dsteingass - click to view full reply 

48594

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/12/30 15:37:15

Post by: dsteingass

My order just placed! woot!

Reply by: Viktor von Domm - click to view full reply 

24297

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/12/30 16:02:41

Post by: Viktor von Domm

fire?!!! now how do you come up with those cool new ideas... i think that is very nice indeed!

Reply by: dsteingass - click to view full reply 

48594

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/12/30 16:38:46

Post by: dsteingass

Your tires will become Legend....wait for it......dary when I am done with them!

Reply by: mxwllmdr - click to view full reply 

46192

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/12/30 17:10:52

Post by: mxwllmdr

Yes, bookmarked, order to come shortly.

Reply by: zinge - click to view full reply 

10028

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/12/30 21:31:47

Post by: zinge

@ Vik re Ideas

What else would you put over the LED in the fist?

Necessity is the mother of invention!

The Bear Necessities is a bitchin' song

1

Reply by: dsteingass - click to view full reply 

48594

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/12/30 21:45:29

Post by: dsteingass

...the simple bear neccessities...
in my head now, thanks a whole helluva lot!

Reply by: zinge - click to view full reply 

10028

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/12/30 21:48:19

Post by: zinge

@dsteingass

http://www.youtube.com/watch?v=qVFyo28rozo

Click it you know you want to

Reply by: RSJake - click to view full reply 

33713

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/12/30 21:54:54

Post by: RSJake

Must....not....clicky-clicky....
ARRRRGGHhhhhhhhh........

Reply by: Viktor von Domm - click to view full reply 

24297

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/12/30 22:43:01

Post by: Viktor von Domm

lol... took me a sec to actually recognize the song...lol...

and zinge... i had a fleating thought as to why you did these sculpts...bin prooven right...^^

Reply by: lone dirty dog - click to view full reply 

28415

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/12/30 23:25:15

Post by: lone dirty dog

No Fire go with a nice clear circle over it and go Marvel Iron man that will kick arse and no I will not click it I have had to listen to lincs FM all day thats enough for a life time without adding to my ear trauma…. those 9.5 off road wheels are so dam small amazing that they are that small but they will be used wisely

Reply by: zinge - click to view full reply 

10028

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/12/31 16:30:51

Post by: zinge

Clear cast of the flames looking better than I had hoped?

Anyone got a preference? What about diffrerent sizes? Probably make some bracketts to hold them.

These are approx 6mm dia and 12mm high

3

Reply by: mxwllmdr - click to view full reply 

46192

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/12/31 16:40:00

Post by: mxwllmdr

Wow a red flicker LED would look bad @$$ in that.

Reply by: lone dirty dog - click to view full reply 

28415

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/12/31 16:51:21

Post by: lone dirty dog

Ok I guess it does kind of look cool after all did you just give the cast a ink wash or is it a green LED in there


Automatically Appended Next Post:
Just looked back over the topic and realised it is a green LED

Reply by: zinge - click to view full reply 

10028

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/12/31 17:03:20

Post by: zinge

and a green/gloss wash

Reply by: mxwllmdr - click to view full reply 

46192

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/12/31 17:17:31

Post by: mxwllmdr

Still think red flicker would be cooler but I would buy some of these for heavy flamers.

Reply by: zinge - click to view full reply 

10028

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2011/12/31 18:02:46

Post by: zinge

Have a great New Year everybody!

See you after the hangover!

Kitty

Reply by: lone dirty dog - click to view full reply 

28415

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2012/01/01 01:10:45

Post by: lone dirty dog

I think mine has all ready started to kick in so HAPPY NEW YEARRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRR I am going to bed I feel nackered night night …………….

Reply by: zinge - click to view full reply 

10028

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2012/01/07 13:33:39

Post by: zinge

HAPPY NEW YEAR!

FAME & FORTUNE!

Zinge Industries Featured in White Dwarf!

1

Reply by: Viktor von Domm - click to view full reply 

24297

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2012/01/07 13:35:09

Post by: Viktor von Domm

happy new year mate! lol... reminds me of monster inq. lol

Reply by: lone dirty dog - click to view full reply 

28415

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2012/01/07 16:16:15

Post by: lone dirty dog

I gather thats you then ………. was it worth the money

Reply by: zinge - click to view full reply 

10028

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2012/01/07 16:25:35

Post by: zinge

Was it worth it?

Had a great day - the guys were really good fun and I now can produce tanks that I am happy with and much quicker. (see below)

Personally I think it was a bargain but there were some guys there who seemed to struggle.

I got a lot out of it and I went to the walkers one - not as useful, bit of repetition but still very useful - will be using the techniques on my Deamon Prince in my plog.

1

Reply by: lone dirty dog - click to view full reply 

28415

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2012/01/07 16:33:13

Post by: lone dirty dog

How much was it in the end if you don't mind me asking and how long was it ?….
Sorry meant to write the tank looks pretty good gather that is from the day what else did you work on ?

Have to say my last order was great really loving my purchases so many idea so little time have to ask will you be selling the dread ammo case they have several uses and have been quite useful but know I will need more …….

I hear you are looking for ideas on the weapon side of things to produce I want these and lots of them but do them ork sizes please (bulky not thin) or so they can be used with orks or Goblins not Grots

Reply by: zinge - click to view full reply 

10028

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2012/01/07 17:23:43

Post by: zinge

It was about £100 and you get dinner, a hellhound tank, set of brushes, some weathering powders and they lend you all the other gear you need.

The day is 10 til 6

The hellhound is built and primed and is treated as a canvas for the day. Lots of different techniques are tried on diffrent areas so at the end of the day it looks a mess but becomes a reference and trial piece.

The Baal I did afterwards with some of the learned techniques.

The starwars prop team seem to buy any old gun and stick a new muzzel on it - instant scifi!


Automatically Appended Next Post:
Dread ammo boxes need a couple of rivets replacing then moulding but all in good time.



Automatically Appended Next Post:
Ok need an idea for a set of Ork Pistols.

Currently done:

Glock,
Mauser,
Magnum,
Flintlock Blunderbuss
& ????

Pictures are always a help.

@Mr Dog - chuck that one in the rifles

Reply by: lone dirty dog - click to view full reply 

28415

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2012/01/08 11:09:24

Post by: lone dirty dog

zinge wrote:It was about £100 and you get dinner, a hellhound tank, set of brushes, some weathering powders and they lend you all the other gear you need.

The day is 10 til 6

The hellhound is built and primed and is treated as a canvas for the day. Lots of different techniques are tried on diffrent areas so at the end of the day it looks a mess but becomes a reference and trial piece.

The Baal I did afterwards with some of the learned techniques.

The starwars prop team seem to buy any old gun and stick a new muzzel on it - instant scifi!


Automatically Appended Next Post:
Dread ammo boxes need a couple of rivets replacing then moulding but all in good time.



Automatically Appended Next Post:
Ok need an idea for a set of Ork Pistols.

Currently done:

Glock,
Mauser,
Magnum,
Flintlock Blunderbuss
& ????

Pictures are always a help.

@Mr Dog - chuck that one in the rifles

So over all good day out and I suppose when you add in everything to the total it's not that bad of a deal …….

Yes the star wars prop team did seem to favour reworking existing weapons in the simplest way but I think that is the charm.

Glad ti hear you are going into production of the Dread ammo boxes make great vent for my grot tank and mega tank scratch builds so will need more and you need to build some dials, gauges, control panels and leavers that kind of converters heaven

I guess these are the Orky versions of Pistols in the range or are weapons you have created all ready

I gather you are making the Jawa gun then I will have a look for a few pictures of inspiration

Reply by: Viktor von Domm - click to view full reply 

24297

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2012/01/08 13:16:53

Post by: Viktor von Domm

for orky pistols...definatly the hellboy gun:




and mabye the one form the second movie too...

Reply by: lone dirty dog - click to view full reply 

28415

Re:Zinge Industries - Bits Site - Modular Buggy Release and Salute 2015 Offer. @ 2012/01/08 14:08:20

Post by: lone dirty dog

Vik you genius Zinge this is a must big bulky and packs shells of kick ass I love it and I want it now...

The other one as well please but this is the best



Automatically Appended Next Post:
Here found a few pictures

and these one's

Will be back soon with more

Magum is actually half way between the samaritan and a magnum.

I am fter more types like uzi or other iconic gun type.

Big baby can go in with the rifles

And here are a few more just for ideas

more the far right weapon the blade

These just look Orky

I just like this one

The bottom right one looks cool works for an ork

This screamed Ork just because of the layout minus the brass

No ork Pirate nob should be without one of these

And last but not least can you make one of these for my ork Kommandos

where the hell do you find all these classy looking gunb pics... some of those seem as if collected at just one major point...

and the delisle gun i know even... silenced WWII gun... lol...stars in one of my major favorite games i play atm...

and i like that top fed orkbolter...sick!

lone dirty dog wrote:

First time I saw that gun I was like "Oh, it's a gun- oh, no it's a knif- oh, it's both"

Heresy! Miking xenos tech with Terran tech!

sounds like a dialogue from crocidile dundee...ah i see you have played the knify game already^^

Viktor von Domm wrote:sounds like a dialogue from crocidile dundee...ah i see you have played the knify game already^^

you quote him well ^^

never saw that one in english tho..or australian for that matter^^

Any chance of separate AK mags?

Eh Uh Ah? sorry just got a bit of Deja vu ay Ben

Will do a set shortly.

Any preference for an orky pistol? You should be the guy ask surely?

A chunky revolver. They look great and are under represented in the current ranges.

The picture of The Samaritan Victor Von Domm posted earlier would be fairly spot on.

Done

Current list is

Glock,
Mauser,
Magnum,
Flintlock Blunderbuss
& ????

Thinking uzi

I saw this one on Dan Abnett's blog



Automatically Appended Next Post:
DO you have the Mausers listed for sale?
oh, nvm..I found it! Damn, and my order has already shipped, yer gonna break me Zinge!

The only mauser I have listed is for 28mm humans

These are for Orks - sorry large mutants......

All I have are 28mm humans, except for my orks
I was farting around and made a Mauser Pattern Laspistol, but I will order your Mausers and add my flash suppressors ok? You've done an awesome job on those

If you could manage a nice Orky Beretta 92f, that'd be quite cool.

I thought we were going orky I like the idea of basing the weapons on current armoury but surly they need to be orkafied





Automatically Appended Next Post:

Viktor von Domm wrote:where the hell do you find all these classy looking gunb pics... some of those seem as if collected at just one major point...

and the delisle gun i know even... silenced WWII gun... lol...stars in one of my major favorite games i play atm...

and i like that top fed orkbolter...sick!

Vik it is amazing what you can find on the net bang a few phrases in and hey presto

Zinge you must build the Jawa gun and the Hell Boy Big Daddy thats kick ass

I quite like Orky weapons that are based on real world ones. The glock one sounds particularly good as I could then give my Ork Outlaw MC's VP the correct weapon rather than a generic slugga.

By the way, dsteingass, I'm impressed by your mauser design.

Fox Box wrote:I quite like Orky weapons that are based on real world ones. The glock one sounds particularly good as I could then give my Ork Outlaw MC's VP the correct weapon rather than a generic slugga.

By the way, dsteingass, I'm impressed by your mauser design.

Yes I know what you mean but I feel they still need to look like they belong so they need to be orkafied or at least look that way before.

So how did i do with my AKs and M4s



I went for Orky scale versions of the classics. Orkier versions maybe on the cards at a later date

Cheers

Kyt

Dont get me wrong I love them well the M4'S have not got any AK'S and have only one M4 you sent as an extra But I am building A group of Kommandos soon so will have a few of each to go with them But the scale is spot on its just I think some real Orky looking weapons would be cool as well……

Uzi wise like this you mean but the silencer wants to be bigger so much bigger

I'm going to find some lunch then I'll post some photos of the AKs in use. I also have an M4 but it's not done yet.

With any luck I'll soon be modifying the AKs to add extra (taped on) magazines.

I LOVE the M4!

Here's two AKs. Both stocks were added by me.



...and the other one:

I was just about to say I did not notice the stock before then read the post I have to get some now for my Kommandos for sure

Yeah instead of sending all my money to GW, it looks like I'll be sending it all to Zinge

My Zinge stuff arrived! Yay!

This little miscast magazine you sent fits oh-so perfectly to my test shotgun


Oh, and you will get a bit of free advertisement from my blog now too

Awesome Fame and Fortune! (stock updated)

Fortune and Glory kid, Fortune and Glory

as i have never seen the second indy movie in english... was that a quote?^^


by the way... that amodrum...cool thing! with that shotgun...screams munda^^

Yes, that was from the Temple of Doom Vik
What does it translate to in German?

dsteingass wrote:

I have to say that works perfectly and looks the dogs bollocks good match there.

Any news or updates of said Ork pistols/rifles production list

Hey Zinge,

You sent me a door with my order, it looks like the doors almost of the sides of the Leman Russ, are you planning on producing them, and if so when will we see them on the site?

dsteingass wrote:Yes, that was from the Temple of Doom Vik
What does it translate to in German?

reichtum und ruhm......which could be translated with fortune and fame...but you get these cross translations sometimes...

Hi Tzarkahn,

They will be available real soon - website issues!

If desperate we can sort something out - pm me.

Cheers

Kit

I'll survive for now but I'll be ordering some when they appear I imagine, I actually just need them for my Leman Russ ideas.

Hey any chance of a picture for those doors Got my order once again great stuff all complete plus a few extras "always appreciated" was wondering the wire cables can we get them in longer lengths at all

Just to continue the show and tell here is my Zinge advertisement


I know it may not look as glamourise but this holds sentimental value as it was my fathers modelling box of tricks and holds many fond memories from my child hood as he made and created all my war kits when i was a little lad, so in its own way it is an honour.
And it goes every where with me even on holidays or those trips to the in-laws well you have to do something.

@ Mr Dog - Nice "toy" box

Pic below - should be available shortly.

Wrapped wires can be made longer but the process is difficult so they arent cheaper I can get up to 250mm fairly reliably which would cost £2.10 each any size.

Cheers

Kit

Zinge Those doors is there any chance of doing what I asked with these doors the smaller size versions I hope so seeing these would mean they would work perfectly


Automatically Appended Next Post:
will check the length I need and get back to you on that one I might get away with the normal ones by going another root but longer might be better

Wow, does the hinge action work without tedious drilling and pinning?

The hinges are interference fit to pins or bolts

Those doors are fantastic, love a good bulkhead!

@ Mr Dog, - Re doors I would probably design a new door at that size - If there is room on my hatch sprue.

Stay tuned

Meaning, the pins or bolts are integral to the hinge? or that the housing is open to accept a pin?

No - There are no pins or bolts only an accurate cut groove that grps the door only good for positioning not "use"


Automatically Appended Next Post:
Although snap fit self hinging doors is quite appealing - anybody else think so?

Zinge you are a star I hope you can just fit them on the sprue as my ideas are increasing so the need is increasing Will you keep them as close to the design of the bulkhead door though if you can do them


As for hinged doors yes would be a great idea for models with interior fittings but they are always tedious and prone to breaking but if it can be done I am sure you're the one to do it …….

Wouldn't snap-fit need to be made of something as hard as ABS?

Zinge@ have we anything new in the pipeline especially on the weapon front orky if you will

@ Mr Dirty - yes and some new ideas and some reworks of some old models that never really cast properly.

No details just yet - when I have rough casts I will be certain to post.

I have been doing some work for Anvil Industies (No relation) and my Girlfriends MA project (No relation - thank god)

Cheers

Spare Bitz

Snap fit hingeswould be awesome!

I think its doable, just needs the right resin and hinge design i.e sufficient room for the part to "flex" without breaking..

Another option would be to design the door hinge pins so they "drop" down into the mounting brackets.. if that makes sense.. door could be removed by lifting upward but would normally just swing on the hinge..

Im trademarking the name "Zinge Hinge", you will have to purchase a licence to use it.. :p

AH

Any sneak peeks then

The Zinge Inge Hinge (tm) is already used on the tracks - it needs refinement though

Teaser? - Go on then seeing as how you used so many emoticons

zinge wrote:The Zinge Inge Hinge (tm) is already used on the tracks - it needs refinement though

Teaser? - Go on then seeing as how you used so many emoticons

Dam I like the look of that so far that will go well with my ork pirates a treat

Now what do I get for all those emotions

Sore fingers

Very droll indeed ……... but true ouch


How long before we see some new stuff in store

What software do you use for designing if you don't mind me asking

I guess you did mind then

zinge wrote:
Projects that will be done: (hopefully)
Large Mutant Pirate Accessories - Hats, Guns, Swords & squarrots????

Yes, please!

OK you teased now deliver ……….

Hoping to have something or things to tease you with further on Sunday.

Currently doing Tax returns - happy happy joy joy!

SWEET!!!! The sooner we see them the sooner I can help with the tax return

Plus I want 6 of the AKS and 6 of the M4'S with my next order so keep them aside

Tax return all but done!

Here come some updates

you really need to do a "with hand" version of the pistols, otherwise its a total nightmare to use them on a mini!

Otherwise looking good!

They have turned out well but I really have only use for the top one and maybe the bottom one, what scale Ork or human

These do look nice casts though detail is top's and crisp you are getting way to good at this , really could do with a larger blunderbuss type gun to match with the top pistol they would look so friggin cool with my Orks.


Any progress with work we discussed

Liking that flintlock a lot. Someday I hope to use it in my pirate necron conversion.

@Dog - Its rollin around my head if anything falls out I will let you know. These are Nob sized.

@ Mr Pitt - definitely need hands on the revolver and flintlock probably left and right.

@Ouze - Pirate necrons - that i gotta see!

the new guns look very good...highly detailed...i like that!

The flintlock is awesome!

I do agree though, these really do need right and left handed versions (held) to allow modellers to adapt them easily.... although these 'loose' versions are also handy for being holstered up!

How about adapting the flintlock to be longer barrelled and like the witchhunter executioner pistol (with a brazier bit on the front?)

nice work as always!!

W

Next up Mauser and a hatch

Now you are talking they are fething fantastic That Mauser is spot on and that hatch is really nicely detailed with updates like this I can see my wallet emptying quickly ……. Mind you your tax return will not be a problem lol


Let me now when they start falling mate


Automatically Appended Next Post:
Can I have some samples of those just to try lol

Good new stuff!
I'm always keeping an eye on this to make sure I don't miss the moment when you have enough new stuff to justify another order.

Loving that hatch!

Next up UZI,

and another picture of the hatch - Which has a snap fit hinge.

That hatch and hinge rock Zinge If you haven't shipped my order yet, I would like to amend it with a few of those. PM me.

Nice job on the hatch and the hinge seems to be a winner, like the uzi turned out nice but it needs a silencer on the end

That hatch is a winner!

Bachman turner overdrive

we aint see nothing yet OOOOoooooo we aint see nothing yet ………

I feel a little odd for just how excited that hatch makes me. Top job.

Next up another hatch - this will replace the other similar hatch which I was never that happy with and was hard to cast.

Loving the Mauser, Magnum and Flintlock
keep it up, man!

Really nice Zinge!

You put an Ork hand on those revolvers, and I'll order several dozen in a heartbeat.

That one is even cooler than the other one, very close to the standard bulkheads on ships, less scifi is a good thing in this case. We're almost there, next order will be soon.

Next order ! this one just keeps growing I hope the misses don't want a holiday this year

Dont want to be pushy but how long till this lot hits the store just so I can start saving ha ha ha lol saving I mean borrow from the bank ……… after all we own it .

Lovely stuff! Looks like my Spores of Anarchy will be getting some additional fire power.

A nice Orky glock for my VP will be nice. Any more Ork scale pistols to come?

Just sorting out the scales now and it seems that they are Warboss sized. A bit bigger than I hoped but no problem I was going to ask this any way:

What sizes do you want which gun in or should I just go the whole hog and make all 5 in boy, Nob and boss sizes?

@Dog don't ask difficult questions! - best guess within the month?

Cheers

Kit

Generally I work at Boy/Nob scale but I suppose it depends how much hassle it is to scale things. Are you 3D printing them?

i wondered too how he might be able to ask for a size preferrence...

He uses Zinge Magick, It's not for Muggles like us to understand......

I'm guessing that at the prodigious rate he turns out the proofs, that it's a very nice additive 3D printing process. Though I wouldnt imagine that he's printing them in bulk...

Resin casts maybe?

the casts are indeed resin... i have the proof on my dask as we speak^^

but i always assumed that the 3D printing was very expensive... i dunno if this hobby stuff could justify the developent costs then...guess zinge wont spill the beans on his desginmaking tho^^

I'm basing my guess off the fact that he posted shots of his "in development" 3D rendering software. Why even use that process, if you aren't using some type of 3D printing?