Forum adverts like this one are shown to any user who is not logged in. Join us by filling out a tiny 3 field form and you will get your own, free, dakka user account which gives a good range of benefits to you: No adverts like this in the forums anymore. Times and dates in your local timezone. Full tracking of what you have read so you can skip to your first unread post, easily see what has changed since you last logged in, and easily see what is new at a glance. Email notifications for threads you want to watch closely. Being a part of the oldest wargaming community on the net. If you are already a member then feel free to login now.

So it all began when the starter set first came out. I did the math and figured you can make a pretty straight foward 1500 point ork army with 6 starter sets. Not to mention a sizable terminator heavy marine army as well (Ask anybody. I have a fetish for terminators). But that was back when starters were cheaper and my local store ran 1500 point tournaments. So I needed to find 350 points. After countless games against my friend's ork horde I knew I needed Ghaz in my list. I didn't want to break away from the gimmick of my orks and buy a model that was not in the starter set, so here was my answer. Using the remains of three Deff Dreads conversions, a marine dreadnought and a fresh warboss, I made the best representation that I could. Oh, and I guess a few bits here and there from the Nobz.

Hope you like it and yes, I know, mold lines.

That is...incredable!

That's really good!

Mega Kudos!

dude that looks awesome.

Has to be one of the best conversions ive seen on the AoBR warboss.

Any chance of a small tut on the parts?

Granted it costs more, but i see nothing wrong with buying 5 dreads and 5 warbosses (AoBR) and making a unit for him too.

Love it, looks better than the real Ghaz simply because he's in a much more dynamic pose.

Jackal wrote:Has to be one of the best conversions ive seen on the AoBR warboss.

Any chance of a small tut on the parts?

Granted it costs more, but i see nothing wrong with buying 5 dreads and 5 warbosses (AoBR) and making a unit for him too.

Lol. I had every intention of doing a tutorial but my excitement made me impatient and I only took one picture in the beginning right after I sliced up some dreadnought parts. Most of the top half was done Tuesday night from 8pm to 2am on a work night. (Don't tell my boss!) Then I stumbled a bit with the hydraulics in the back and the tubing.

Here is an overview of the parts from top to bottom left to right.

-The boss pole is the boss poll but it had to be raised using the bottom part of a nob axe shaft.
-The gun is the Boss shoota minus the back end, and I added to cut down nob pistols to bulk it up and add ammo.
-The "Machine-gun Arm" is the dreadnought close combat arm with the hand cut off and the storm bolter shaved down. The hand end making up the shoulder plate
-The hand is the shoulder chopped away to a suitable size and enclosed with the dread's top rear middle plate and flat bits of the deffkopta landing... skies (?)
-The hose is from the dread's close combat hand, cut to fit into place.
-The Boss's arm, minus the gun and hand, was glued to the underside of the arm and set to the torso.
--The torso was cut from the rear half of the dread
First use a saw to remove it from the circular hip section
Second saw off the engine along the rear of the top armor plates
Then cut top to bottom along the middle plate on top along both side. (sorry if it seems confusing but this part was really key in making it come together.) I will try to get the picture up.
Glue the two halves together and you got your torso. You will need to clean out the remains of the engine block and also the two little nubs under the torso along with the big chunk between the nubs. Otherwise it will look anorexic.
-the horns were taken from a nob helmet
-The head is the boss head mounted on the trimmed down sarcophagus plate glued inside the torso since there is nothing inside there to glue the head to
-I was pretty happy with the iron gob which was made from the scrolled dreadnought leg plate, flipped upside down.
-You will see another close combat hand tubing connecting the klaw arm. This was left over from deff dread conversions.
-The Klaw arm is just the klaw arm but you have to keep the shoulder to extend it out. Notice the familiar hole punched armor under there?
-The arm was then bulked up with the other leg plate. You have to do a lot of shaving to get some of this stuff to fit the way you want.
-The legs are the boss legs just with a bunch of bits glued to it. It was cut across the top just above the icons head...maybe a little through it.
-The thighs were plated with more of the kopta ski bits, the fronts I think.
-The knee caps are the very front part of the dread's toes
-The hydraulics are from rear hip section
-The feet were done with the dread feet. I cut the left and right sides of each, flipped the foot upside down, and glued one of the toes mirroring one end. The heel end is the end that is missing the furthest section (toe nail?) in order to get the proportion right.
-On the back I put in the multi melta arm, shaving off bits to make it fit and removed the purity seal.
-The rounded end of the melta ammo was shaved down and drilled to look like exhaust.
-the bottom of Shoot magazine was glued to that plain flat area on the right.
-The icon section of a nob axe was cut into a block and glued to the lower middle of the multi melta
-An extra storm bolter from that other project was glued to fill in the gap in the armor.
-The multimelta hose was also used to fill the gap between the backpack and butt plate
-The butt plates were taken from the rear hip section like the shin hydraulics. *Notice that the missing third section of the butt plates were kept on the hydraulics on the shins to help fill the gap between the foot armor and the boss foot. Did I mention I cut the toes off the warboss feet? Well, I did.
-The hard part was getting the hydraulics from the dreadnaught legs to fit properly around the calf area. By some miracle, it eventually found a place, so I glued it.
-Note that contrary to how I listed the steps, the leg bits are easier to glue on if you do it from the bottom of the leg and work your way up. And then glue the knee plates last.

I think that just about does it. I wonder if I will stumble across a clone of this model in the near future. Thanks for looking. Oh, it's 4:30... Tournament starts in less than 7 hours. yayyyyyyyy...

AWESOME

but what model is left from the AOBR warboss, it just seem so little, that you could nearly calls this a kitbash instead of a conversion

so very very cool, it must have taken ages. Did you plan it out as best you could first or just sort of start chocpping and hacking bits up and make it us as you went along

Best warboss conversion to date man !!! Kudos

That is rather good...

That looks fantastic, and no green stuff or putty. Just wow.

Skelly wrote:Love it, looks better than the real Ghaz simply because he's in a much more dynamic pose.

This..

I've never cared for the "official" Ghazzie sculpt,always made me think of a schoolyard bully off to swipe some milk money...
Your conversion however looks great,the pose is very menacing ...just like Ghazzie should be..
Excelent work.

EXCELLENT use of AoBR bits, I'd never thought of using a dread that way.

Fan-freakin' tastic! Simply the best AoBR conversion I've ever seen. Kudos to you.

Very very cool. Best of all, if you didnt want to take Ghaz, he would be a fantastically cool megaboss.

Very cool indeed. Clever use of bits.

That's how to convert an ork. GJ

I much prefer this over the horrible GW Ghaz, Granted it's probably cost a lot more than he would, just in the amount of units you sliced up to get to this point, but this guy is unique.

LOVE IT!

If only GW would look at this model and redo the mega armour for orks... it's pure awesomness +1 to you




Automatically Appended Next Post:
this needs paint and then to go into the best converted model thread asap


Automatically Appended Next Post:
not just one clone but many many many clones I feel as word of the awesome spreads

That's nice. I was thinking of updating my Ghaz and I just may steal your idea.

Really, really awesome. Please tell me that when you paint this, you will leave some of the original Chapter paint jobs visible on the dreadnought parts, just to needle those stupid marines! Simply wonderful.

very cool indeed. the only constructive criticism i can think of is to add a little something to the joint where the gun joins the arm as it looks a bit too kitbashed right there. otherwise, you've done an incredible job!

Very impressive!

Amazing work. Very inspiring, and an extremely creative use of those parts. Bravo!

awesome!

Hmm.. I was just thinking of how to build some better MANs...I think you're on to something!

Nice work!

Just WOW! I could use that my warboss!

I'm impressed! The use of the Dreadnought multimelta is especially clever.